dmesg - Intel Core i5-4250U - Intel Haswell-ULT IGP - Intel

Return To Intel Core i5-4250U - Intel Haswell-ULT IGP - Intel System Information

efi: EFI v2.31 by American Megatrends
efi:  ACPI=0xdbb11000  ACPI 2.0=0xdbb11000  SMBIOS=0xf04d0  MPS=0xfd530 
SMBIOS 2.8 present.
DMI:                  /D54250WYK, BIOS WYLPT10H.86A.0026.2014.0514.1714 05/14/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x41fe00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-DFFFF uncachable
  E0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0000000000 mask 7C00000000 write-back
  1 base 0400000000 mask 7FE0000000 write-back
  2 base 00E0000000 mask 7FE0000000 uncachable
  3 base 00DE000000 mask 7FFE000000 uncachable
  4 base 00DD000000 mask 7FFF000000 uncachable
  5 base 041FE00000 mask 7FFFE00000 uncachable
  6 disabled
  7 disabled
  8 disabled
  9 disabled
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
total RAM covered: 16334M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 64M 	num_reg: 9  	lose cover RAM: 0G
e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdc000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd770-0x000fd77f] mapped at [ffff8abd000fd770]
Base memory trampoline at [ffff8abd00097000] 97000 size 24576
Using GB pages for direct mapping
BRK [0x10b550000, 0x10b550fff] PGTABLE
BRK [0x10b551000, 0x10b551fff] PGTABLE
BRK [0x10b552000, 0x10b552fff] PGTABLE
BRK [0x10b553000, 0x10b553fff] PGTABLE
BRK [0x10b554000, 0x10b554fff] PGTABLE
BRK [0x10b555000, 0x10b555fff] PGTABLE
BRK [0x10b556000, 0x10b556fff] PGTABLE
BRK [0x10b557000, 0x10b557fff] PGTABLE
BRK [0x10b558000, 0x10b558fff] PGTABLE
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000DBB11000 000024 (v02 INTEL )
ACPI: XSDT 0x00000000DBB11088 00008C (v01 INTEL  D54250WY 0000001A AMI  00010013)
ACPI: FACP 0x00000000DBB20998 00010C (v05 INTEL  D54250WY 0000001A AMI  00010013)
ACPI: DSDT 0x00000000DBB111A0 00F7F7 (v02 INTEL  D54250WY 0000001A INTL 20120711)
ACPI: FACS 0x00000000DBC8EF80 000040
ACPI: APIC 0x00000000DBB20AA8 000072 (v03 INTEL  D54250WY 0000001A AMI  00010013)
ACPI: FPDT 0x00000000DBB20B20 000044 (v01 INTEL  D54250WY 0000001A AMI  00010013)
ACPI: FIDT 0x00000000DBB20B68 00009C (v01 INTEL  D54250WY 0000001A AMI  00010013)
ACPI: SSDT 0x00000000DBB20C08 0004F7 (v01 INTEL  D54250WY 0000001A INTL 20120711)
ACPI: SSDT 0x00000000DBB21100 000AD8 (v01 INTEL  D54250WY 0000001A INTL 20120711)
ACPI: MCFG 0x00000000DBB21BD8 00003C (v01 INTEL  D54250WY 0000001A MSFT 00000097)
ACPI: HPET 0x00000000DBB21C18 000038 (v01 INTEL  D54250WY 0000001A AMI. 00000005)
ACPI: SSDT 0x00000000DBB21C50 000315 (v01 INTEL  D54250WY 0000001A INTL 20120711)
ACPI: SSDT 0x00000000DBB21F68 0030DF (v01 INTEL  D54250WY 0000001A INTL 20091112)
ACPI: BGRT 0x00000000DBB25048 000038 (v00 INTEL  D54250WY 0000001A AMI  00010013)
ACPI: DMAR 0x00000000DBB25080 0001AC (v01 INTEL  D54250WY 0000001A INTL 00000001)
ACPI: CSRT 0x00000000DBB25230 0000C4 (v01 INTEL  D54250WY 0000001A INTL 20100528)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000041fdfffff]
NODE_DATA(0) allocated [mem 0x41fdfe000-0x41fdfffff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000041fdfffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x0000000000057fff]
  node   0: [mem 0x0000000000059000-0x000000000009efff]
  node   0: [mem 0x0000000000100000-0x00000000c7e67fff]
  node   0: [mem 0x00000000c7e6f000-0x00000000dba73fff]
  node   0: [mem 0x00000000dbfff000-0x00000000dbffffff]
  node   0: [mem 0x0000000100000000-0x000000041fdfffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000041fdfffff]
On node 0 totalpages: 4175883
  DMA zone: 64 pages used for memmap
  DMA zone: 24 pages reserved
  DMA zone: 3997 pages, LIFO batch:0
  DMA32 zone: 13994 pages used for memmap
  DMA32 zone: 895598 pages, LIFO batch:31
  Normal zone: 51192 pages used for memmap
  Normal zone: 3276288 pages, LIFO batch:31
Reserving Intel graphics memory at 0x00000000dd200000-0x00000000df1fffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-39
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 34 pages/cpu @ffff8ac11fa00000 s102104 r8192 d28968 u524288
pcpu-alloc: s102104 r8192 d28968 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 4110609
Policy zone: Normal
DMAR: Disable GFX device mapping
PID hash table entries: 4096 (order: 3, 32768 bytes)
Memory: 16116756K/16703532K available (10640K kernel code, 1559K rwdata, 4268K rodata, 1124K init, 660K bss, 586776K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
	CONFIG_RCU_FANOUT set to non-default value of 32
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS:16640 nr_irqs:728 16
	Offload RCU callbacks from all CPUs
	Offload RCU callbacks from CPUs: 0-3.
Console: colour dummy device 80x25
console [tty0] enabled
console [ttyS0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1895.498 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3790.99 BogoMIPS (lpj=1895498)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160930
ACPI: 5 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'performance', was 'normal'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
clr: Applying alternatives
clr: Applying alternatives done
clr: Applying alternatives smp done
Freeing SMP alternatives memory: 40K
smpboot: Max logical packages: 2
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
DMAR: RMRR base: 0x000000dbeb2000 end: 0x000000dbec0fff
DMAR: RMRR base: 0x000000dd000000 end: 0x000000df1fffff
DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
DMAR: ANDD device: 3 name: \_SB.PCI0.SPI0
DMAR: ANDD device: 4 name: \_SB.PCI0.SPI1
DMAR: ANDD device: 5 name: \_SB.PCI0.UA00
DMAR: ANDD device: 6 name: \_SB.PCI0.UA01
DMAR: ANDD device: 7 name: \_SB.PCI0.SDHC
DMAR-IR: IOAPIC id 8 under DRHD base  0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i5-4250U CPU @ 1.30GHz (family: 0x6, model: 0x45, stepping: 0x1)
calling  trace_init_flags_sys_exit+0x0/0xf @ 1
initcall trace_init_flags_sys_exit+0x0/0xf returned 0 after 0 usecs
calling  trace_init_flags_sys_enter+0x0/0xf @ 1
initcall trace_init_flags_sys_enter+0x0/0xf returned 0 after 0 usecs
calling  init_hw_perf_events+0x0/0x54d @ 1
Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
initcall init_hw_perf_events+0x0/0x54d returned 0 after 30 usecs
calling  init_real_mode+0x0/0x1ad @ 1
initcall init_real_mode+0x0/0x1ad returned 0 after 8 usecs
calling  trace_init_perf_perm_irq_work_exit+0x0/0x13 @ 1
initcall trace_init_perf_perm_irq_work_exit+0x0/0x13 returned 0 after 0 usecs
calling  register_nmi_cpu_backtrace_handler+0x0/0x16 @ 1
initcall register_nmi_cpu_backtrace_handler+0x0/0x16 returned 0 after 0 usecs
calling  early_efi_map_fb+0x0/0x38 @ 1
initcall early_efi_map_fb+0x0/0x38 returned 0 after 0 usecs
calling  spawn_ksoftirqd+0x0/0x40 @ 1
initcall spawn_ksoftirqd+0x0/0x40 returned 0 after 11 usecs
calling  migration_init+0x0/0x34 @ 1
initcall migration_init+0x0/0x34 returned 0 after 0 usecs
calling  check_cpu_stall_init+0x0/0x1b @ 1
initcall check_cpu_stall_init+0x0/0x1b returned 0 after 0 usecs
calling  rcu_register_oom_notifier+0x0/0x14 @ 1
initcall rcu_register_oom_notifier+0x0/0x14 returned 0 after 0 usecs
calling  rcu_spawn_gp_kthread+0x0/0x136 @ 1
initcall rcu_spawn_gp_kthread+0x0/0x136 returned 0 after 27 usecs
calling  cpu_stop_init+0x0/0x9e @ 1
initcall cpu_stop_init+0x0/0x9e returned 0 after 9 usecs
calling  init_events+0x0/0x68 @ 1
initcall init_events+0x0/0x68 returned 0 after 9 usecs
calling  init_trace_printk+0x0/0x12 @ 1
initcall init_trace_printk+0x0/0x12 returned 0 after 0 usecs
calling  event_trace_enable_again+0x0/0x57 @ 1
initcall event_trace_enable_again+0x0/0x57 returned 0 after 0 usecs
calling  lru_init+0x0/0x4b @ 1
initcall lru_init+0x0/0x4b returned 0 after 10 usecs
calling  dynamic_debug_init+0x0/0x26b @ 1
initcall dynamic_debug_init+0x0/0x26b returned 0 after 425 usecs
calling  rand_initialize+0x0/0xf0 @ 1
initcall rand_initialize+0x0/0xf0 returned 0 after 40 usecs
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (15163.98 BogoMIPS)
devtmpfs: initialized
calling  ipc_ns_init+0x0/0x48 @ 1
initcall ipc_ns_init+0x0/0x48 returned 0 after 0 usecs
calling  init_mmap_min_addr+0x0/0x16 @ 1
initcall init_mmap_min_addr+0x0/0x16 returned 0 after 0 usecs
calling  init_cpufreq_transition_notifier_list+0x0/0x1b @ 1
initcall init_cpufreq_transition_notifier_list+0x0/0x1b returned 0 after 0 usecs
calling  net_ns_init+0x0/0x134 @ 1
initcall net_ns_init+0x0/0x134 returned 0 after 18 usecs
calling  e820_mark_nvs_memory+0x0/0x38 @ 1
initcall e820_mark_nvs_memory+0x0/0x38 returned 0 after 0 usecs
calling  cpufreq_register_tsc_scaling+0x0/0x32 @ 1
initcall cpufreq_register_tsc_scaling+0x0/0x32 returned 0 after 0 usecs
calling  init_cpu_syscore+0x0/0x14 @ 1
initcall init_cpu_syscore+0x0/0x14 returned 0 after 0 usecs
calling  reboot_init+0x0/0x37 @ 1
initcall reboot_init+0x0/0x37 returned 0 after 2 usecs
calling  init_lapic_sysfs+0x0/0x24 @ 1
initcall init_lapic_sysfs+0x0/0x24 returned 0 after 0 usecs
calling  wq_sysfs_init+0x0/0x2b @ 1
initcall wq_sysfs_init+0x0/0x2b returned 0 after 10 usecs
calling  ksysfs_init+0x0/0x97 @ 1
initcall ksysfs_init+0x0/0x97 returned 0 after 3 usecs
calling  pm_init+0x0/0x5a @ 1
initcall pm_init+0x0/0x5a returned 0 after 11 usecs
calling  rcu_exp_runtime_mode+0x0/0x1c @ 1
initcall rcu_exp_runtime_mode+0x0/0x1c returned 0 after 0 usecs
calling  init_jiffies_clocksource+0x0/0x19 @ 1
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
initcall init_jiffies_clocksource+0x0/0x19 returned 0 after 2 usecs
calling  futex_init+0x0/0xd9 @ 1
futex hash table entries: 1024 (order: 4, 65536 bytes)
initcall futex_init+0x0/0xd9 returned 0 after 12 usecs
calling  cgroup_wq_init+0x0/0x54 @ 1
initcall cgroup_wq_init+0x0/0x54 returned 0 after 8 usecs
calling  init_wakeup_tracer+0x0/0x32 @ 1
initcall init_wakeup_tracer+0x0/0x32 returned 0 after 1 usecs
calling  init_per_zone_wmark_min+0x0/0x71 @ 1
initcall init_per_zone_wmark_min+0x0/0x71 returned 0 after 2 usecs
calling  init_zero_pfn+0x0/0x38 @ 1
initcall init_zero_pfn+0x0/0x38 returned 0 after 0 usecs
calling  fsnotify_init+0x0/0x24 @ 1
initcall fsnotify_init+0x0/0x24 returned 0 after 0 usecs
calling  filelock_init+0x0/0x95 @ 1
initcall filelock_init+0x0/0x95 returned 0 after 2 usecs
calling  init_misc_binfmt+0x0/0x2d @ 1
initcall init_misc_binfmt+0x0/0x2d returned 0 after 0 usecs
calling  init_script_binfmt+0x0/0x16 @ 1
initcall init_script_binfmt+0x0/0x16 returned 0 after 0 usecs
calling  init_elf_binfmt+0x0/0x16 @ 1
initcall init_elf_binfmt+0x0/0x16 returned 0 after 0 usecs
calling  init_compat_elf_binfmt+0x0/0x16 @ 1
initcall init_compat_elf_binfmt+0x0/0x16 returned 0 after 0 usecs
calling  debugfs_init+0x0/0x50 @ 1
initcall debugfs_init+0x0/0x50 returned 0 after 1 usecs
calling  tracefs_init+0x0/0x3b @ 1
initcall tracefs_init+0x0/0x3b returned 0 after 0 usecs
calling  securityfs_init+0x0/0x47 @ 1
initcall securityfs_init+0x0/0x47 returned 0 after 0 usecs
calling  calibrate_xor_blocks+0x0/0x12c @ 1
xor: automatically using best checksumming function   avx       
initcall calibrate_xor_blocks+0x0/0x12c returned 0 after 0 usecs
calling  prandom_init+0x0/0xcc @ 1
initcall prandom_init+0x0/0xcc returned 0 after 2 usecs
calling  pinctrl_init+0x0/0xae @ 1
pinctrl core: initialized pinctrl subsystem
initcall pinctrl_init+0x0/0xae returned 0 after 13 usecs
calling  virtio_init+0x0/0x30 @ 1
initcall virtio_init+0x0/0x30 returned 0 after 4 usecs
calling  iommu_init+0x0/0x2b @ 1
initcall iommu_init+0x0/0x2b returned 0 after 0 usecs
calling  cpufreq_core_init+0x0/0x4c @ 1
initcall cpufreq_core_init+0x0/0x4c returned 0 after 0 usecs
calling  cpuidle_init+0x0/0x3b @ 1
initcall cpuidle_init+0x0/0x3b returned 0 after 2 usecs
calling  capsule_reboot_register+0x0/0x12 @ 1
initcall capsule_reboot_register+0x0/0x12 returned 0 after 0 usecs
calling  sock_init+0x0/0x8f @ 1
initcall sock_init+0x0/0x8f returned 0 after 41 usecs
calling  net_inuse_init+0x0/0x24 @ 1
initcall net_inuse_init+0x0/0x24 returned 0 after 0 usecs
calling  init_default_flow_dissectors+0x0/0x50 @ 1
initcall init_default_flow_dissectors+0x0/0x50 returned 0 after 0 usecs
calling  netpoll_init+0x0/0x31 @ 1
initcall netpoll_init+0x0/0x31 returned 0 after 0 usecs
calling  netlink_proto_init+0x0/0x16c @ 1
NET: Registered protocol family 16
initcall netlink_proto_init+0x0/0x16c returned 0 after 32 usecs
calling  irq_sysfs_init+0x0/0x96 @ 1
initcall irq_sysfs_init+0x0/0x96 returned 0 after 60 usecs
calling  bdi_class_init+0x0/0x49 @ 1
initcall bdi_class_init+0x0/0x49 returned 0 after 3 usecs
calling  mm_sysfs_init+0x0/0x29 @ 1
initcall mm_sysfs_init+0x0/0x29 returned 0 after 1 usecs
calling  kobject_uevent_init+0x0/0x12 @ 1
initcall kobject_uevent_init+0x0/0x12 returned 0 after 1 usecs
calling  pcibus_class_init+0x0/0x19 @ 1
initcall pcibus_class_init+0x0/0x19 returned 0 after 2 usecs
calling  pci_driver_init+0x0/0x12 @ 1
initcall pci_driver_init+0x0/0x12 returned 0 after 4 usecs
calling  backlight_class_init+0x0/0xa7 @ 1
initcall backlight_class_init+0x0/0xa7 returned 0 after 1 usecs
calling  tty_class_init+0x0/0x34 @ 1
initcall tty_class_init+0x0/0x34 returned 0 after 1 usecs
calling  vtconsole_class_init+0x0/0xde @ 1
initcall vtconsole_class_init+0x0/0xde returned 0 after 12 usecs
calling  iommu_dev_init+0x0/0x19 @ 1
initcall iommu_dev_init+0x0/0x19 returned 0 after 1 usecs
calling  register_node_type+0x0/0x19 @ 1
initcall register_node_type+0x0/0x19 returned 0 after 10 usecs
calling  regmap_initcall+0x0/0xd @ 1
initcall regmap_initcall+0x0/0xd returned 0 after 0 usecs
calling  mipi_dsi_bus_init+0x0/0x12 @ 1
initcall mipi_dsi_bus_init+0x0/0x12 returned 0 after 3 usecs
calling  spi_init+0x0/0xa6 @ 1
initcall spi_init+0x0/0xa6 returned 0 after 5 usecs
calling  i2c_init+0x0/0x98 @ 1
initcall i2c_init+0x0/0x98 returned 0 after 7 usecs
calling  init_ladder+0x0/0x25 @ 1
cpuidle: using governor ladder
initcall init_ladder+0x0/0x25 returned 0 after 22 usecs
calling  init_menu+0x0/0x12 @ 1
cpuidle: using governor menu
initcall init_menu+0x0/0x12 returned 0 after 18 usecs
calling  pcc_init+0x0/0x94 @ 1
PCCT header not found.
initcall pcc_init+0x0/0x94 returned -19 after 1 usecs
calling  amd_postcore_init+0x0/0x121 @ 1
initcall amd_postcore_init+0x0/0x121 returned 0 after 0 usecs
calling  bts_init+0x0/0xaa @ 1
initcall bts_init+0x0/0xaa returned 0 after 1 usecs
calling  pt_init+0x0/0x31f @ 1
initcall pt_init+0x0/0x31f returned -19 after 0 usecs
calling  boot_params_ksysfs_init+0x0/0x222 @ 1
initcall boot_params_ksysfs_init+0x0/0x222 returned 0 after 15 usecs
calling  sbf_init+0x0/0x103 @ 1
initcall sbf_init+0x0/0x103 returned 0 after 0 usecs
calling  arch_kdebugfs_init+0x0/0x1fb @ 1
initcall arch_kdebugfs_init+0x0/0x1fb returned 0 after 6 usecs
calling  mtrr_if_init+0x0/0x61 @ 1
initcall mtrr_if_init+0x0/0x61 returned 0 after 1 usecs
calling  ffh_cstate_init+0x0/0x2b @ 1
initcall ffh_cstate_init+0x0/0x2b returned 0 after 0 usecs
calling  activate_jump_labels+0x0/0x7b @ 1
initcall activate_jump_labels+0x0/0x7b returned 0 after 0 usecs
calling  kcmp_cookies_init+0x0/0x36 @ 1
initcall kcmp_cookies_init+0x0/0x36 returned 0 after 1 usecs
calling  acpi_pci_init+0x0/0x58 @ 1
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
initcall acpi_pci_init+0x0/0x58 returned 0 after 1 usecs
calling  dma_bus_init+0x0/0xd6 @ 1
initcall dma_bus_init+0x0/0xd6 returned 0 after 7 usecs
calling  dma_channel_table_init+0x0/0xd7 @ 1
initcall dma_channel_table_init+0x0/0xd7 returned 0 after 3 usecs
calling  dmi_id_init+0x0/0x2fd @ 1
initcall dmi_id_init+0x0/0x2fd returned 0 after 21 usecs
calling  dca_init+0x0/0x1e @ 1
dca service started, version 1.12.1
initcall dca_init+0x0/0x1e returned 0 after 2 usecs
calling  pci_arch_init+0x0/0x66 @ 1
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
initcall pci_arch_init+0x0/0x66 returned 0 after 18 usecs
calling  init_vdso+0x0/0x35 @ 1
initcall init_vdso+0x0/0x35 returned 0 after 18 usecs
calling  sysenter_setup+0x0/0x14 @ 1
initcall sysenter_setup+0x0/0x14 returned 0 after 0 usecs
calling  fixup_ht_bug+0x0/0xa6 @ 1
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
initcall fixup_ht_bug+0x0/0xa6 returned 0 after 0 usecs
calling  topology_init+0x0/0x8e @ 1
initcall topology_init+0x0/0x8e returned 0 after 91 usecs
calling  mtrr_init_finialize+0x0/0x42 @ 1
initcall mtrr_init_finialize+0x0/0x42 returned 0 after 0 usecs
calling  uid_cache_init+0x0/0x95 @ 1
initcall uid_cache_init+0x0/0x95 returned 0 after 0 usecs
calling  param_sysfs_init+0x0/0x1b6 @ 1
initcall param_sysfs_init+0x0/0x1b6 returned 0 after 1532 usecs
calling  user_namespace_sysctl_init+0x0/0x34 @ 1
initcall user_namespace_sysctl_init+0x0/0x34 returned 0 after 5 usecs
calling  proc_schedstat_init+0x0/0x22 @ 1
initcall proc_schedstat_init+0x0/0x22 returned 0 after 0 usecs
calling  pm_sysrq_init+0x0/0x19 @ 1
initcall pm_sysrq_init+0x0/0x19 returned 0 after 5 usecs
calling  create_proc_profile+0x0/0xe0 @ 1
initcall create_proc_profile+0x0/0xe0 returned 0 after 0 usecs
calling  cgroup_namespaces_init+0x0/0x8 @ 1
initcall cgroup_namespaces_init+0x0/0x8 returned 0 after 0 usecs
calling  user_namespaces_init+0x0/0x2d @ 1
initcall user_namespaces_init+0x0/0x2d returned 0 after 2 usecs
calling  oom_init+0x0/0x5f @ 1
initcall oom_init+0x0/0x5f returned 0 after 13 usecs
calling  default_bdi_init+0x0/0x3e @ 1
initcall default_bdi_init+0x0/0x3e returned 0 after 28 usecs
calling  percpu_enable_async+0x0/0xf @ 1
initcall percpu_enable_async+0x0/0xf returned 0 after 0 usecs
calling  kcompactd_init+0x0/0x94 @ 1
initcall kcompactd_init+0x0/0x94 returned 0 after 8 usecs
calling  init_reserve_notifier+0x0/0x8 @ 1
initcall init_reserve_notifier+0x0/0x8 returned 0 after 0 usecs
calling  init_admin_reserve+0x0/0x40 @ 1
initcall init_admin_reserve+0x0/0x40 returned 0 after 0 usecs
calling  init_user_reserve+0x0/0x40 @ 1
initcall init_user_reserve+0x0/0x40 returned 0 after 0 usecs
calling  hugetlb_init+0x0/0x1b @ 1
HugeTLB registered 2 MB page size, pre-allocated 0 pages
initcall hugetlb_init+0x0/0x1b returned 0 after 11 usecs
calling  mmu_notifier_init+0x0/0x12 @ 1
initcall mmu_notifier_init+0x0/0x12 returned 0 after 0 usecs
calling  ksm_init+0x0/0x148 @ 1
initcall ksm_init+0x0/0x148 returned 0 after 14 usecs
calling  hugepage_init+0x0/0x144 @ 1
initcall hugepage_init+0x0/0x144 returned 0 after 18 usecs
calling  mem_cgroup_swap_init+0x0/0x78 @ 1
initcall mem_cgroup_swap_init+0x0/0x78 returned 0 after 0 usecs
calling  mem_cgroup_init+0x0/0x150 @ 1
initcall mem_cgroup_init+0x0/0x150 returned 0 after 1 usecs
calling  crypto_wq_init+0x0/0x31 @ 1
initcall crypto_wq_init+0x0/0x31 returned 0 after 15 usecs
calling  cryptomgr_init+0x0/0x12 @ 1
initcall cryptomgr_init+0x0/0x12 returned 0 after 0 usecs
calling  cryptd_init+0x0/0xba @ 1
initcall cryptd_init+0x0/0xba returned 0 after 1 usecs
calling  init_bio+0x0/0xd5 @ 1
initcall init_bio+0x0/0xd5 returned 0 after 36 usecs
calling  blk_settings_init+0x0/0x2a @ 1
initcall blk_settings_init+0x0/0x2a returned 0 after 0 usecs
calling  blk_ioc_init+0x0/0x2a @ 1
initcall blk_ioc_init+0x0/0x2a returned 0 after 2 usecs
calling  blk_softirq_init+0x0/0x7d @ 1
initcall blk_softirq_init+0x0/0x7d returned 0 after 0 usecs
calling  blk_mq_init+0x0/0x4e @ 1
initcall blk_mq_init+0x0/0x4e returned 0 after 0 usecs
calling  genhd_device_init+0x0/0x76 @ 1
initcall genhd_device_init+0x0/0x76 returned 0 after 24 usecs
calling  raid6_select_algo+0x0/0x8f @ 1
raid6: Forced to use recovery algorithm avx2x2
raid6: Forced gen() algo avx2x4
initcall raid6_select_algo+0x0/0x8f returned 0 after 1 usecs
calling  irq_poll_setup+0x0/0x7d @ 1
initcall irq_poll_setup+0x0/0x7d returned 0 after 0 usecs
calling  pwm_debugfs_init+0x0/0x24 @ 1
initcall pwm_debugfs_init+0x0/0x24 returned 0 after 1 usecs
calling  pwm_sysfs_init+0x0/0x19 @ 1
initcall pwm_sysfs_init+0x0/0x19 returned 0 after 2 usecs
calling  pci_slot_init+0x0/0x50 @ 1
initcall pci_slot_init+0x0/0x50 returned 0 after 1 usecs
calling  fbmem_init+0x0/0xcf @ 1
initcall fbmem_init+0x0/0xcf returned 0 after 3 usecs
calling  acpi_init+0x0/0x317 @ 1
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8AC10D305C00 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8AC10F01E000 0005AA (v01 PmRef  ApIst    00003000 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8AC10D33D600 000119 (v01 PmRef  ApCst    00003000 INTL 20120711)
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
pci 0000:00:02.0: [8086:0a26] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xf7c34000-0xf7c37fff 64bit]
pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7c20000-0xf7c2ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf7c3e000-0xf7c3e01f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:1559] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xf7c00000-0xf7c1ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xf7c3c000-0xf7c3cfff]
pci 0000:00:19.0: reg 0x18: [io  0xf080-0xf09f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7c30000-0xf7c33fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7c3b000-0xf7c3b3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io  0xf0d0-0xf0d7]
pci 0000:00:1f.2: reg 0x14: [io  0xf0c0-0xf0c3]
pci 0000:00:1f.2: reg 0x18: [io  0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 0x1c: [io  0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7c3a000-0xf7c3a7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7c39000-0xf7c390ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 4 GPEs in block 00 to 7F
initcall acpi_init+0x0/0x317 returned 0 after 20132 usecs
calling  pnp_init+0x0/0x12 @ 1
initcall pnp_init+0x0/0x12 returned 0 after 5 usecs
calling  misc_init+0x0/0xbc @ 1
initcall misc_init+0x0/0xbc returned 0 after 3 usecs
calling  cn_init+0x0/0xb0 @ 1
initcall cn_init+0x0/0xb0 returned 0 after 7 usecs
calling  dax_init+0x0/0x10d @ 1
initcall dax_init+0x0/0x10d returned 0 after 14 usecs
calling  dma_buf_init+0x0/0xac @ 1
initcall dma_buf_init+0x0/0xac returned 0 after 1 usecs
calling  init_scsi+0x0/0x78 @ 1
SCSI subsystem initialized
initcall init_scsi+0x0/0x78 returned 0 after 32 usecs
calling  ata_init+0x0/0x315 @ 1
libata version 3.00 loaded.
initcall ata_init+0x0/0x315 returned 0 after 33 usecs
calling  vga_arb_device_init+0x0/0x178 @ 1
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
initcall vga_arb_device_init+0x0/0x178 returned 0 after 29 usecs
calling  usb_init+0x0/0x162 @ 1
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
initcall usb_init+0x0/0x162 returned 0 after 38 usecs
calling  serio_init+0x0/0x2a @ 1
initcall serio_init+0x0/0x2a returned 0 after 4 usecs
calling  input_init+0x0/0x101 @ 1
initcall input_init+0x0/0x101 returned 0 after 3 usecs
calling  rtc_init+0x0/0x4d @ 1
initcall rtc_init+0x0/0x4d returned 0 after 1 usecs
calling  pps_init+0x0/0xaa @ 1
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
initcall pps_init+0x0/0xaa returned 0 after 2 usecs
calling  ptp_init+0x0/0x99 @ 1
PTP clock support registered
initcall ptp_init+0x0/0x99 returned 0 after 2 usecs
calling  hwmon_init+0x0/0xd9 @ 1
initcall hwmon_init+0x0/0xd9 returned 0 after 2 usecs
calling  md_init+0x0/0x166 @ 1
initcall md_init+0x0/0x166 returned 0 after 27 usecs
calling  mmc_init+0x0/0x35 @ 1
initcall mmc_init+0x0/0x35 returned 0 after 10 usecs
calling  leds_init+0x0/0x3c @ 1
initcall leds_init+0x0/0x3c returned 0 after 1 usecs
calling  dmi_init+0x0/0x111 @ 1
initcall dmi_init+0x0/0x111 returned 0 after 3 usecs
calling  efisubsys_init+0x0/0x289 @ 1
Registered efivars operations
initcall efisubsys_init+0x0/0x289 returned 0 after 3933 usecs
calling  hv_acpi_init+0x0/0x186 @ 1
initcall hv_acpi_init+0x0/0x186 returned -19 after 0 usecs
calling  devfreq_init+0x0/0xa3 @ 1
initcall devfreq_init+0x0/0xa3 returned 0 after 20 usecs
calling  devfreq_performance_init+0x0/0x12 @ 1
initcall devfreq_performance_init+0x0/0x12 returned 0 after 0 usecs
calling  pci_subsys_init+0x0/0x48 @ 1
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0xc6483018-0xc7ffffff]
e820: reserve RAM buffer [mem 0xc6493018-0xc7ffffff]
e820: reserve RAM buffer [mem 0xc7e68000-0xc7ffffff]
e820: reserve RAM buffer [mem 0xdba74000-0xdbffffff]
e820: reserve RAM buffer [mem 0x41fe00000-0x41fffffff]
initcall pci_subsys_init+0x0/0x48 returned 0 after 1278 usecs
calling  proto_init+0x0/0x12 @ 1
initcall proto_init+0x0/0x12 returned 0 after 1 usecs
calling  net_dev_init+0x0/0x20a @ 1
initcall net_dev_init+0x0/0x20a returned 0 after 63 usecs
calling  neigh_init+0x0/0x80 @ 1
initcall neigh_init+0x0/0x80 returned 0 after 0 usecs
calling  fib_rules_init+0x0/0xac @ 1
initcall fib_rules_init+0x0/0xac returned 0 after 0 usecs
calling  init_cgroup_netprio+0x0/0x14 @ 1
initcall init_cgroup_netprio+0x0/0x14 returned 0 after 0 usecs
calling  pktsched_init+0x0/0x10f @ 1
initcall pktsched_init+0x0/0x10f returned 0 after 1 usecs
calling  tc_filter_init+0x0/0x55 @ 1
initcall tc_filter_init+0x0/0x55 returned 0 after 0 usecs
calling  genl_init+0x0/0x36 @ 1
initcall genl_init+0x0/0x36 returned 0 after 3 usecs
calling  ipv4_netfilter_init+0x0/0x12 @ 1
initcall ipv4_netfilter_init+0x0/0x12 returned 0 after 0 usecs
calling  cipso_v4_init+0x0/0x65 @ 1
initcall cipso_v4_init+0x0/0x65 returned 0 after 0 usecs
calling  netlbl_init+0x0/0x79 @ 1
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel:  unlabeled traffic allowed by default
initcall netlbl_init+0x0/0x79 returned 0 after 14 usecs
calling  nmi_warning_debugfs+0x0/0x27 @ 1
initcall nmi_warning_debugfs+0x0/0x27 returned 0 after 1 usecs
calling  save_microcode_in_initrd+0x0/0x31 @ 1
initcall save_microcode_in_initrd+0x0/0x31 returned 0 after 1 usecs
calling  hpet_late_init+0x0/0x10e @ 1
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
initcall hpet_late_init+0x0/0x10e returned 0 after 1971 usecs
calling  init_amd_nbs+0x0/0xa0 @ 1
initcall init_amd_nbs+0x0/0xa0 returned 0 after 2 usecs
calling  clocksource_done_booting+0x0/0x42 @ 1
clocksource: Switched to clocksource hpet
initcall clocksource_done_booting+0x0/0x42 returned 0 after 10 usecs
calling  tracer_init_tracefs+0x0/0x183 @ 1
initcall tracer_init_tracefs+0x0/0x183 returned 0 after 711 usecs
calling  init_trace_printk_function_export+0x0/0x32 @ 1
initcall init_trace_printk_function_export+0x0/0x32 returned 0 after 0 usecs
calling  event_trace_init+0x0/0x2f3 @ 1
initcall event_trace_init+0x0/0x2f3 returned 0 after 7052 usecs
calling  bpf_init+0x0/0x47 @ 1
initcall bpf_init+0x0/0x47 returned 0 after 5 usecs
calling  init_pipe_fs+0x0/0x47 @ 1
initcall init_pipe_fs+0x0/0x47 returned 0 after 8 usecs
calling  cgroup_writeback_init+0x0/0x2b @ 1
initcall cgroup_writeback_init+0x0/0x2b returned 0 after 16 usecs
calling  inotify_user_setup+0x0/0x4b @ 1
initcall inotify_user_setup+0x0/0x4b returned 0 after 2 usecs
calling  eventpoll_init+0x0/0xdd @ 1
initcall eventpoll_init+0x0/0xdd returned 0 after 1 usecs
calling  anon_inode_init+0x0/0x5b @ 1
initcall anon_inode_init+0x0/0x5b returned 0 after 3 usecs
calling  proc_locks_init+0x0/0x22 @ 1
initcall proc_locks_init+0x0/0x22 returned 0 after 1 usecs
calling  proc_cmdline_init+0x0/0x22 @ 1
initcall proc_cmdline_init+0x0/0x22 returned 0 after 0 usecs
calling  proc_consoles_init+0x0/0x22 @ 1
initcall proc_consoles_init+0x0/0x22 returned 0 after 0 usecs
calling  proc_cpuinfo_init+0x0/0x22 @ 1
initcall proc_cpuinfo_init+0x0/0x22 returned 0 after 0 usecs
calling  proc_devices_init+0x0/0x22 @ 1
initcall proc_devices_init+0x0/0x22 returned 0 after 0 usecs
calling  proc_interrupts_init+0x0/0x22 @ 1
initcall proc_interrupts_init+0x0/0x22 returned 0 after 1 usecs
calling  proc_loadavg_init+0x0/0x22 @ 1
initcall proc_loadavg_init+0x0/0x22 returned 0 after 0 usecs
calling  proc_meminfo_init+0x0/0x22 @ 1
initcall proc_meminfo_init+0x0/0x22 returned 0 after 0 usecs
calling  proc_stat_init+0x0/0x22 @ 1
initcall proc_stat_init+0x0/0x22 returned 0 after 0 usecs
calling  proc_uptime_init+0x0/0x22 @ 1
initcall proc_uptime_init+0x0/0x22 returned 0 after 0 usecs
calling  proc_version_init+0x0/0x22 @ 1
initcall proc_version_init+0x0/0x22 returned 0 after 0 usecs
calling  proc_softirqs_init+0x0/0x22 @ 1
initcall proc_softirqs_init+0x0/0x22 returned 0 after 0 usecs
calling  proc_kmsg_init+0x0/0x25 @ 1
initcall proc_kmsg_init+0x0/0x25 returned 0 after 0 usecs
calling  proc_page_init+0x0/0x5f @ 1
initcall proc_page_init+0x0/0x5f returned 0 after 1 usecs
calling  init_ramfs_fs+0x0/0x20 @ 1
initcall init_ramfs_fs+0x0/0x20 returned 0 after 0 usecs
calling  init_hugetlbfs_fs+0x0/0x155 @ 1
initcall init_hugetlbfs_fs+0x0/0x155 returned 0 after 13 usecs
calling  blk_scsi_ioctl_init+0x0/0x38c @ 1
initcall blk_scsi_ioctl_init+0x0/0x38c returned 0 after 0 usecs
calling  dynamic_debug_init_debugfs+0x0/0x67 @ 1
initcall dynamic_debug_init_debugfs+0x0/0x67 returned 0 after 1 usecs
calling  fb_console_init+0x0/0xfc @ 1
initcall fb_console_init+0x0/0xfc returned 0 after 18 usecs
calling  acpi_event_init+0x0/0x30 @ 1
initcall acpi_event_init+0x0/0x30 returned 0 after 6 usecs
calling  pnp_system_init+0x0/0x12 @ 1
initcall pnp_system_init+0x0/0x12 returned 0 after 6 usecs
calling  pnpacpi_init+0x0/0x6e @ 1
pnp: PnP ACPI init
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io  0x0680-0x069f] has been reserved
system 00:01: [io  0xffff] has been reserved
system 00:01: [io  0xffff] has been reserved
system 00:01: [io  0xffff] has been reserved
system 00:01: [io  0x1c00-0x1cfe] has been reserved
system 00:01: [io  0x1d00-0x1dfe] has been reserved
system 00:01: [io  0x1e00-0x1efe] has been reserved
system 00:01: [io  0x1f00-0x1ffe] has been reserved
system 00:01: [io  0x1800-0x18fe] has been reserved
system 00:01: [io  0x164e-0x164f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io  0x1854-0x1857] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:04: [io  0x0a00-0x0a1f] has been reserved
system 00:04: [io  0x0a00-0x0a0f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs NTN0530 (disabled)
system 00:06: [io  0x04d0-0x04d1] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xfe102000-0xfe102fff] has been reserved
system 00:07: [mem 0xfe104000-0xfe104fff] has been reserved
system 00:07: [mem 0xfe106000-0xfe106fff] has been reserved
system 00:07: [mem 0xfe108000-0xfe108fff] has been reserved
system 00:07: [mem 0xfe10a000-0xfe10afff] has been reserved
system 00:07: [mem 0xfe10c000-0xfe10cfff] has been reserved
system 00:07: [mem 0xfe10e000-0xfe10efff] has been reserved
system 00:07: [mem 0xfe112000-0xfe112fff] has been reserved
system 00:07: [mem 0xfe111000-0xfe111007] has been reserved
system 00:07: [mem 0xfe111014-0xfe111fff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:08: [mem 0xff000000-0xffffffff] has been reserved
system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:08: [mem 0xf7fdf000-0xf7fdffff] has been reserved
system 00:08: [mem 0xf7fe0000-0xf7feffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
initcall pnpacpi_init+0x0/0x6e returned 0 after 1410 usecs
calling  chr_dev_init+0x0/0xaa @ 1
initcall chr_dev_init+0x0/0xaa returned 0 after 1308 usecs
calling  firmware_class_init+0x0/0x31 @ 1
initcall firmware_class_init+0x0/0x31 returned 0 after 0 usecs
calling  thermal_init+0x0/0x89 @ 1
initcall thermal_init+0x0/0x89 returned 0 after 8 usecs
calling  cpufreq_gov_performance_init+0x0/0x12 @ 1
initcall cpufreq_gov_performance_init+0x0/0x12 returned 0 after 0 usecs
calling  init_acpi_pm_clocksource+0x0/0xd2 @ 1
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
initcall init_acpi_pm_clocksource+0x0/0xd2 returned 0 after 4422 usecs
calling  pcibios_assign_resources+0x0/0xc2 @ 1
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 11 [mem 0xdf200000-0xfeafffff window]
initcall pcibios_assign_resources+0x0/0xc2 returned 0 after 93 usecs
calling  sysctl_core_init+0x0/0x2c @ 1
initcall sysctl_core_init+0x0/0x2c returned 0 after 10 usecs
calling  eth_offload_init+0x0/0x14 @ 1
initcall eth_offload_init+0x0/0x14 returned 0 after 0 usecs
calling  inet_init+0x0/0x25e @ 1
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
initcall inet_init+0x0/0x25e returned 0 after 540 usecs
calling  ipv4_offload_init+0x0/0x5d @ 1
initcall ipv4_offload_init+0x0/0x5d returned 0 after 0 usecs
calling  af_unix_init+0x0/0x4e @ 1
NET: Registered protocol family 1
initcall af_unix_init+0x0/0x4e returned 0 after 3 usecs
calling  ipv6_offload_init+0x0/0x7f @ 1
initcall ipv6_offload_init+0x0/0x7f returned 0 after 0 usecs
calling  pci_apply_final_quirks+0x0/0x107 @ 1
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
initcall pci_apply_final_quirks+0x0/0x107 returned 0 after 15557 usecs
calling  acpi_reserve_resources+0x0/0xeb @ 1
initcall acpi_reserve_resources+0x0/0xeb returned 0 after 1 usecs
calling  populate_rootfs+0x0/0xa6 @ 1
initcall populate_rootfs+0x0/0xa6 returned 0 after 32 usecs
calling  pci_iommu_init+0x0/0x3c @ 1
DMAR: ACPI device "INT33C2:00" under DMAR at fed91000 as 00:15.1
DMAR: ACPI device "INT33C3:00" under DMAR at fed91000 as 00:15.2
DMAR: ACPI device "INT33C0:00" under DMAR at fed91000 as 00:15.3
DMAR: ACPI device "INT33C1:00" under DMAR at fed91000 as 00:15.4
DMAR: ACPI device "INT33C4:00" under DMAR at fed91000 as 00:15.5
DMAR: ACPI device "INT33C5:00" under DMAR at fed91000 as 00:15.6
DMAR: ACPI device "INT33C6:00" under DMAR at fed91000 as 00:17.0
DMAR: No ATSR found
DMAR: dmar1: Using Queued invalidation
DMAR: Setting RMRR:
DMAR: Setting identity map for device 0000:00:14.0 [0xdbeb2000 - 0xdbec0fff]
DMAR: Setting identity map for device 0000:00:1d.0 [0xdbeb2000 - 0xdbec0fff]
DMAR: Prepare 0-16MiB unity mapping for LPC
DMAR: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
DMAR: Intel(R) Virtualization Technology for Directed I/O
iommu: Adding device 0000:00:00.0 to group 0
iommu: Adding device 0000:00:03.0 to group 1
iommu: Adding device 0000:00:14.0 to group 2
iommu: Adding device 0000:00:16.0 to group 3
iommu: Adding device 0000:00:19.0 to group 4
iommu: Adding device 0000:00:1b.0 to group 5
iommu: Adding device 0000:00:1d.0 to group 6
iommu: Adding device 0000:00:1f.0 to group 7
iommu: Adding device 0000:00:1f.2 to group 7
iommu: Adding device 0000:00:1f.3 to group 7
initcall pci_iommu_init+0x0/0x3c returned 0 after 1950 usecs
calling  ir_dev_scope_init+0x0/0x33 @ 1
initcall ir_dev_scope_init+0x0/0x33 returned 0 after 0 usecs
calling  ia32_binfmt_init+0x0/0x14 @ 1
initcall ia32_binfmt_init+0x0/0x14 returned 0 after 3 usecs
calling  amd_uncore_init+0x0/0x1c5 @ 1
initcall amd_uncore_init+0x0/0x1c5 returned -19 after 0 usecs
calling  amd_ibs_init+0x0/0x1d5 @ 1
initcall amd_ibs_init+0x0/0x1d5 returned -19 after 0 usecs
calling  msr_init+0x0/0xc3 @ 1
initcall msr_init+0x0/0xc3 returned 0 after 1 usecs
calling  intel_cqm_init+0x0/0x3b2 @ 1
initcall intel_cqm_init+0x0/0x3b2 returned -19 after 0 usecs
calling  rapl_pmu_init+0x0/0x20d @ 1
RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
initcall rapl_pmu_init+0x0/0x20d returned 0 after 36 usecs
calling  intel_uncore_init+0x0/0x24d @ 1
initcall intel_uncore_init+0x0/0x24d returned 0 after 61 usecs
calling  cstate_pmu_init+0x0/0x1a7 @ 1
initcall cstate_pmu_init+0x0/0x1a7 returned 0 after 38 usecs
calling  vmx_init+0x0/0x1e @ 1
initcall vmx_init+0x0/0x1e returned 0 after 120 usecs
calling  register_kernel_offset_dumper+0x0/0x1b @ 1
initcall register_kernel_offset_dumper+0x0/0x1b returned 0 after 0 usecs
calling  i8259A_init_ops+0x0/0x24 @ 1
initcall i8259A_init_ops+0x0/0x24 returned 0 after 0 usecs
calling  init_tsc_clocksource+0x0/0xcc @ 1
initcall init_tsc_clocksource+0x0/0xcc returned 0 after 1 usecs
calling  add_rtc_cmos+0x0/0xa7 @ 1
initcall add_rtc_cmos+0x0/0xa7 returned 0 after 0 usecs
calling  i8237A_init_ops+0x0/0x14 @ 1
initcall i8237A_init_ops+0x0/0x14 returned 0 after 4 usecs
calling  thermal_throttle_init_device+0x0/0x42 @ 1
initcall thermal_throttle_init_device+0x0/0x42 returned 0 after 43 usecs
calling  msr_init+0x0/0xdb @ 1
initcall msr_init+0x0/0xdb returned 0 after 153 usecs
calling  cpuid_init+0x0/0xdb @ 1
initcall cpuid_init+0x0/0xdb returned 0 after 108 usecs
calling  ioapic_init_ops+0x0/0x14 @ 1
initcall ioapic_init_ops+0x0/0x14 returned 0 after 0 usecs
calling  start_periodic_check_for_corruption+0x0/0x50 @ 1
initcall start_periodic_check_for_corruption+0x0/0x50 returned 0 after 0 usecs
calling  sysfb_init+0x0/0x74 @ 1
initcall sysfb_init+0x0/0x74 returned 0 after 14 usecs
calling  aes_init+0x0/0x12 @ 1
alg: self-tests disabled
initcall aes_init+0x0/0x12 returned 0 after 41 usecs
calling  init+0x0/0x45 @ 1
initcall init+0x0/0x45 returned 0 after 126 usecs
calling  crc32c_intel_mod_init+0x0/0x57 @ 1
initcall crc32c_intel_mod_init+0x0/0x57 returned 0 after 18 usecs
calling  sha256_ssse3_mod_init+0x0/0xe8 @ 1
initcall sha256_ssse3_mod_init+0x0/0xe8 returned 0 after 111 usecs
calling  sha512_ssse3_mod_init+0x0/0xad @ 1
initcall sha512_ssse3_mod_init+0x0/0xad returned 0 after 110 usecs
calling  camellia_aesni_init+0x0/0x7b @ 1
initcall camellia_aesni_init+0x0/0x7b returned 0 after 181 usecs
calling  serpent_init+0x0/0x41 @ 1
initcall serpent_init+0x0/0x41 returned 0 after 186 usecs
calling  camellia_aesni_init+0x0/0x89 @ 1
initcall camellia_aesni_init+0x0/0x89 returned 0 after 185 usecs
calling  init+0x0/0x6f @ 1
initcall init+0x0/0x6f returned 0 after 205 usecs
calling  pmc_atom_init+0x0/0x1c6 @ 1
initcall pmc_atom_init+0x0/0x1c6 returned -19 after 1 usecs
calling  iosf_mbi_init+0x0/0x1b @ 1
initcall iosf_mbi_init+0x0/0x1b returned 0 after 9 usecs
calling  proc_execdomains_init+0x0/0x22 @ 1
initcall proc_execdomains_init+0x0/0x22 returned 0 after 1 usecs
calling  cpuhp_sysfs_init+0x0/0x7b @ 1
initcall cpuhp_sysfs_init+0x0/0x7b returned 0 after 8 usecs
calling  ioresources_init+0x0/0x3c @ 1
initcall ioresources_init+0x0/0x3c returned 0 after 1 usecs
calling  init_sched_debug_procfs+0x0/0x2c @ 1
initcall init_sched_debug_procfs+0x0/0x2c returned 0 after 0 usecs
calling  timekeeping_init_ops+0x0/0x14 @ 1
initcall timekeeping_init_ops+0x0/0x14 returned 0 after 0 usecs
calling  init_clocksource_sysfs+0x0/0x69 @ 1
initcall init_clocksource_sysfs+0x0/0x69 returned 0 after 21 usecs
calling  init_timer_list_procfs+0x0/0x2c @ 1
initcall init_timer_list_procfs+0x0/0x2c returned 0 after 0 usecs
calling  alarmtimer_init+0x0/0x17e @ 1
initcall alarmtimer_init+0x0/0x17e returned 0 after 20 usecs
calling  init_posix_timers+0x0/0x252 @ 1
initcall init_posix_timers+0x0/0x252 returned 0 after 3 usecs
calling  init_posix_cpu_timers+0x0/0x99 @ 1
initcall init_posix_cpu_timers+0x0/0x99 returned 0 after 0 usecs
calling  clockevents_init_sysfs+0x0/0xd1 @ 1
initcall clockevents_init_sysfs+0x0/0xd1 returned 0 after 49 usecs
calling  init_tstats_procfs+0x0/0x2c @ 1
initcall init_tstats_procfs+0x0/0x2c returned 0 after 1 usecs
calling  proc_dma_init+0x0/0x22 @ 1
initcall proc_dma_init+0x0/0x22 returned 0 after 0 usecs
calling  proc_modules_init+0x0/0x22 @ 1
initcall proc_modules_init+0x0/0x22 returned 0 after 0 usecs
calling  kallsyms_init+0x0/0x25 @ 1
initcall kallsyms_init+0x0/0x25 returned 0 after 0 usecs
calling  pid_namespaces_init+0x0/0x40 @ 1
initcall pid_namespaces_init+0x0/0x40 returned 0 after 4 usecs
calling  utsname_sysctl_init+0x0/0x14 @ 1
initcall utsname_sysctl_init+0x0/0x14 returned 0 after 3 usecs
calling  init_tracepoints+0x0/0x28 @ 1
initcall init_tracepoints+0x0/0x28 returned 0 after 0 usecs
calling  init_lstats_procfs+0x0/0x25 @ 1
initcall init_lstats_procfs+0x0/0x25 returned 0 after 0 usecs
calling  init_blk_tracer+0x0/0x56 @ 1
initcall init_blk_tracer+0x0/0x56 returned 0 after 4 usecs
calling  perf_event_sysfs_init+0x0/0x98 @ 1
initcall perf_event_sysfs_init+0x0/0x98 returned 0 after 160 usecs
calling  padata_driver_init+0x0/0x39 @ 1
initcall padata_driver_init+0x0/0x39 returned 0 after 0 usecs
calling  system_trusted_keyring_init+0x0/0x61 @ 1
Initialise system trusted keyrings
initcall system_trusted_keyring_init+0x0/0x61 returned 0 after 2 usecs
calling  kswapd_init+0x0/0x98 @ 1
initcall kswapd_init+0x0/0x98 returned 0 after 16 usecs
calling  extfrag_debug_init+0x0/0x78 @ 1
initcall extfrag_debug_init+0x0/0x78 returned 0 after 3 usecs
calling  setup_vmstat+0x0/0x268 @ 1
initcall setup_vmstat+0x0/0x268 returned 0 after 32 usecs
calling  mm_compute_batch_init+0x0/0x56 @ 1
initcall mm_compute_batch_init+0x0/0x56 returned 0 after 0 usecs
calling  workingset_init+0x0/0x7f @ 1
workingset: timestamp_bits=44 max_order=22 bucket_order=0
initcall workingset_init+0x0/0x7f returned 0 after 1 usecs
calling  proc_vmalloc_init+0x0/0x25 @ 1
initcall proc_vmalloc_init+0x0/0x25 returned 0 after 0 usecs
calling  procswaps_init+0x0/0x22 @ 1
initcall procswaps_init+0x0/0x22 returned 0 after 0 usecs
calling  slab_sysfs_init+0x0/0xfc @ 1
initcall slab_sysfs_init+0x0/0xfc returned 0 after 882 usecs
calling  fcntl_init+0x0/0x2a @ 1
initcall fcntl_init+0x0/0x2a returned 0 after 1 usecs
calling  proc_filesystems_init+0x0/0x22 @ 1
initcall proc_filesystems_init+0x0/0x22 returned 0 after 0 usecs
calling  start_dirtytime_writeback+0x0/0x2a @ 1
initcall start_dirtytime_writeback+0x0/0x2a returned 0 after 0 usecs
calling  blkdev_init+0x0/0x25 @ 1
initcall blkdev_init+0x0/0x25 returned 0 after 23 usecs
calling  dio_init+0x0/0x2d @ 1
initcall dio_init+0x0/0x2d returned 0 after 16 usecs
calling  dnotify_init+0x0/0x79 @ 1
initcall dnotify_init+0x0/0x79 returned 0 after 2 usecs
calling  fanotify_user_setup+0x0/0x52 @ 1
initcall fanotify_user_setup+0x0/0x52 returned 0 after 2 usecs
calling  aio_setup+0x0/0xa3 @ 1
initcall aio_setup+0x0/0xa3 returned 0 after 8 usecs
calling  init_sys32_ioctl+0x0/0x28 @ 1
initcall init_sys32_ioctl+0x0/0x28 returned 0 after 67 usecs
calling  mbcache_init+0x0/0x31 @ 1
initcall mbcache_init+0x0/0x31 returned 0 after 13 usecs
calling  init_devpts_fs+0x0/0x28 @ 1
initcall init_devpts_fs+0x0/0x28 returned 0 after 6 usecs
calling  ext4_init_fs+0x0/0x15b @ 1
initcall ext4_init_fs+0x0/0x15b returned 0 after 59 usecs
calling  journal_init+0x0/0x107 @ 1
initcall journal_init+0x0/0x107 returned 0 after 62 usecs
calling  init_fat_fs+0x0/0x4a @ 1
initcall init_fat_fs+0x0/0x4a returned 0 after 22 usecs
calling  init_vfat_fs+0x0/0x12 @ 1
initcall init_vfat_fs+0x0/0x12 returned 0 after 0 usecs
calling  init_msdos_fs+0x0/0x12 @ 1
initcall init_msdos_fs+0x0/0x12 returned 0 after 0 usecs
calling  init_nls_cp437+0x0/0x14 @ 1
initcall init_nls_cp437+0x0/0x14 returned 0 after 0 usecs
calling  init_nls_ascii+0x0/0x14 @ 1
initcall init_nls_ascii+0x0/0x14 returned 0 after 0 usecs
calling  init_autofs4_fs+0x0/0x26 @ 1
initcall init_autofs4_fs+0x0/0x26 returned 0 after 25 usecs
calling  ovl_init+0x0/0x12 @ 1
initcall ovl_init+0x0/0x12 returned 0 after 0 usecs
calling  init_xfs_fs+0x0/0x19b @ 1
SGI XFS with ACLs, security attributes, realtime, no debug enabled
initcall init_xfs_fs+0x0/0x19b returned 0 after 222 usecs
calling  init_pstore_fs+0x0/0x47 @ 1
initcall init_pstore_fs+0x0/0x47 returned 0 after 1 usecs
calling  efivarfs_init+0x0/0x34 @ 1
initcall efivarfs_init+0x0/0x34 returned 0 after 0 usecs
calling  ipc_init+0x0/0x17 @ 1
initcall ipc_init+0x0/0x17 returned 0 after 1 usecs
calling  ipc_sysctl_init+0x0/0x14 @ 1
initcall ipc_sysctl_init+0x0/0x14 returned 0 after 7 usecs
calling  init_mqueue_fs+0x0/0x10a @ 1
initcall init_mqueue_fs+0x0/0x10a returned 0 after 24 usecs
calling  key_proc_init+0x0/0x5e @ 1
initcall key_proc_init+0x0/0x5e returned 0 after 1 usecs
calling  crypto_algapi_init+0x0/0xd @ 1
initcall crypto_algapi_init+0x0/0xd returned 0 after 0 usecs
calling  seqiv_module_init+0x0/0x12 @ 1
initcall seqiv_module_init+0x0/0x12 returned 0 after 0 usecs
calling  echainiv_module_init+0x0/0x12 @ 1
initcall echainiv_module_init+0x0/0x12 returned 0 after 0 usecs
calling  rsa_init+0x0/0x40 @ 1
initcall rsa_init+0x0/0x40 returned 0 after 28 usecs
calling  hmac_module_init+0x0/0x12 @ 1
initcall hmac_module_init+0x0/0x12 returned 0 after 0 usecs
calling  crypto_null_mod_init+0x0/0x48 @ 1
initcall crypto_null_mod_init+0x0/0x48 returned 0 after 88 usecs
calling  md5_mod_init+0x0/0x12 @ 1
initcall md5_mod_init+0x0/0x12 returned 0 after 19 usecs
calling  sha1_generic_mod_init+0x0/0x12 @ 1
initcall sha1_generic_mod_init+0x0/0x12 returned 0 after 20 usecs
calling  sha256_generic_mod_init+0x0/0x17 @ 1
initcall sha256_generic_mod_init+0x0/0x17 returned 0 after 40 usecs
calling  sha512_generic_mod_init+0x0/0x17 @ 1
initcall sha512_generic_mod_init+0x0/0x17 returned 0 after 43 usecs
calling  crypto_ecb_module_init+0x0/0x12 @ 1
initcall crypto_ecb_module_init+0x0/0x12 returned 0 after 0 usecs
calling  crypto_cbc_module_init+0x0/0x12 @ 1
initcall crypto_cbc_module_init+0x0/0x12 returned 0 after 0 usecs
calling  crypto_module_init+0x0/0x12 @ 1
initcall crypto_module_init+0x0/0x12 returned 0 after 0 usecs
calling  crypto_module_init+0x0/0x12 @ 1
initcall crypto_module_init+0x0/0x12 returned 0 after 0 usecs
calling  crypto_ctr_module_init+0x0/0x39 @ 1
initcall crypto_ctr_module_init+0x0/0x39 returned 0 after 0 usecs
calling  crypto_ccm_module_init+0x0/0x58 @ 1
initcall crypto_ccm_module_init+0x0/0x58 returned 0 after 0 usecs
calling  serpent_mod_init+0x0/0x17 @ 1
initcall serpent_mod_init+0x0/0x17 returned 0 after 41 usecs
calling  aes_init+0x0/0x12 @ 1
initcall aes_init+0x0/0x12 returned 0 after 19 usecs
calling  arc4_init+0x0/0x17 @ 1
initcall arc4_init+0x0/0x17 returned 0 after 41 usecs
calling  deflate_mod_init+0x0/0x3a @ 1
initcall deflate_mod_init+0x0/0x3a returned 0 after 80 usecs
calling  crc32c_mod_init+0x0/0x12 @ 1
initcall crc32c_mod_init+0x0/0x12 returned 0 after 20 usecs
calling  crct10dif_mod_init+0x0/0x12 @ 1
initcall crct10dif_mod_init+0x0/0x12 returned 0 after 20 usecs
calling  drbg_init+0x0/0x1c6 @ 1
initcall drbg_init+0x0/0x1c6 returned 0 after 167 usecs
calling  jent_mod_init+0x0/0x30 @ 1
initcall jent_mod_init+0x0/0x30 returned 0 after 190 usecs
calling  af_alg_init+0x0/0x3b @ 1
NET: Registered protocol family 38
initcall af_alg_init+0x0/0x3b returned 0 after 0 usecs
calling  algif_hash_init+0x0/0x12 @ 1
initcall algif_hash_init+0x0/0x12 returned 0 after 0 usecs
calling  algif_skcipher_init+0x0/0x12 @ 1
initcall algif_skcipher_init+0x0/0x12 returned 0 after 0 usecs
calling  asymmetric_key_init+0x0/0x12 @ 1
Key type asymmetric registered
initcall asymmetric_key_init+0x0/0x12 returned 0 after 1 usecs
calling  x509_key_init+0x0/0x12 @ 1
Asymmetric key parser 'x509' registered
initcall x509_key_init+0x0/0x12 returned 0 after 0 usecs
calling  proc_genhd_init+0x0/0x3c @ 1
initcall proc_genhd_init+0x0/0x3c returned 0 after 2 usecs
calling  bsg_init+0x0/0x126 @ 1
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
initcall bsg_init+0x0/0x126 returned 0 after 21 usecs
calling  throtl_init+0x0/0x42 @ 1
initcall throtl_init+0x0/0x42 returned 0 after 21 usecs
calling  noop_init+0x0/0x12 @ 1
io scheduler noop registered
initcall noop_init+0x0/0x12 returned 0 after 1 usecs
calling  deadline_init+0x0/0x12 @ 1
io scheduler deadline registered
initcall deadline_init+0x0/0x12 returned 0 after 0 usecs
calling  cfq_init+0x0/0x74 @ 1
io scheduler cfq registered (default)
initcall cfq_init+0x0/0x74 returned 0 after 6 usecs
calling  crc_t10dif_mod_init+0x0/0x61 @ 1
initcall crc_t10dif_mod_init+0x0/0x61 returned 0 after 2 usecs
calling  libcrc32c_mod_init+0x0/0x2c @ 1
initcall libcrc32c_mod_init+0x0/0x2c returned 0 after 0 usecs
calling  percpu_counter_startup+0x0/0x74 @ 1
initcall percpu_counter_startup+0x0/0x74 returned 0 after 20 usecs
calling  sg_pool_init+0x0/0xe4 @ 1
initcall sg_pool_init+0x0/0xe4 returned 0 after 7 usecs
calling  pci_proc_init+0x0/0x6e @ 1
initcall pci_proc_init+0x0/0x6e returned 0 after 9 usecs
calling  pcie_portdrv_init+0x0/0x73 @ 1
initcall pcie_portdrv_init+0x0/0x73 returned 0 after 14 usecs
calling  pcie_pme_service_init+0x0/0x12 @ 1
initcall pcie_pme_service_init+0x0/0x12 returned 0 after 2 usecs
calling  pci_hotplug_init+0x0/0x8 @ 1
initcall pci_hotplug_init+0x0/0x8 returned 0 after 0 usecs
calling  pci_stub_init+0x0/0x12c @ 1
initcall pci_stub_init+0x0/0x12c returned 0 after 4 usecs
calling  efifb_driver_init+0x0/0x14 @ 1
efifb: probing for efifb
efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
initcall efifb_driver_init+0x0/0x14 returned 0 after 3701 usecs
calling  intel_idle_init+0x0/0x58b @ 1
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4.1 model 0x45
intel_idle: lapic_timer_reliable_states 0xffffffff
initcall intel_idle_init+0x0/0x58b returned 0 after 192 usecs
calling  acpi_button_driver_init+0x0/0x12 @ 1
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
initcall acpi_button_driver_init+0x0/0x12 returned 0 after 94 usecs
calling  acpi_fan_driver_init+0x0/0x14 @ 1
initcall acpi_fan_driver_init+0x0/0x14 returned 0 after 182 usecs
calling  acpi_video_init+0x0/0x8a @ 1
initcall acpi_video_init+0x0/0x8a returned 0 after 2 usecs
calling  acpi_processor_driver_init+0x0/0x94 @ 1
initcall acpi_processor_driver_init+0x0/0x94 returned 0 after 63 usecs
calling  acpi_thermal_init+0x0/0x7f @ 1
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
initcall acpi_thermal_init+0x0/0x7f returned 0 after 522 usecs
calling  acpi_ec_sys_init+0x0/0xfc @ 1
initcall acpi_ec_sys_init+0x0/0xfc returned -19 after 0 usecs
calling  acpi_pad_init+0x0/0xe2 @ 1
initcall acpi_pad_init+0x0/0xe2 returned 0 after 17 usecs
calling  erst_init+0x0/0x2f5 @ 1
initcall erst_init+0x0/0x2f5 returned 0 after 0 usecs
calling  gpio_clk_driver_init+0x0/0x14 @ 1
initcall gpio_clk_driver_init+0x0/0x14 returned 0 after 5 usecs
calling  ioat_init_module+0x0/0xb1 @ 1
ioatdma: Intel(R) QuickData Technology Driver 4.00
initcall ioat_init_module+0x0/0xb1 returned 0 after 13 usecs
calling  virtio_pci_driver_init+0x0/0x1b @ 1
initcall virtio_pci_driver_init+0x0/0x1b returned 0 after 7 usecs
calling  pty_init+0x0/0x210 @ 1
initcall pty_init+0x0/0x210 returned 0 after 29 usecs
calling  sysrq_init+0x0/0x6f @ 1
initcall sysrq_init+0x0/0x6f returned 0 after 1 usecs
calling  serial8250_init+0x0/0x16a @ 1
serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
initcall serial8250_init+0x0/0x16a returned 0 after 20388 usecs
calling  serial_pci_driver_init+0x0/0x1b @ 1
initcall serial_pci_driver_init+0x0/0x1b returned 0 after 20 usecs
calling  ttyprintk_init+0x0/0x102 @ 1
initcall ttyprintk_init+0x0/0x102 returned 0 after 44 usecs
calling  init+0x0/0xfd @ 1
initcall init+0x0/0xfd returned 0 after 11 usecs
calling  hpet_init+0x0/0x65 @ 1
initcall hpet_init+0x0/0x65 returned 0 after 145 usecs
calling  hwrng_modinit+0x0/0x7d @ 1
initcall hwrng_modinit+0x0/0x7d returned 0 after 44 usecs
calling  mod_init+0x0/0x1f5 @ 1
initcall mod_init+0x0/0x1f5 returned -19 after 13 usecs
calling  virtio_rng_driver_init+0x0/0x12 @ 1
initcall virtio_rng_driver_init+0x0/0x12 returned 0 after 3 usecs
calling  cn_proc_init+0x0/0x36 @ 1
initcall cn_proc_init+0x0/0x36 returned 0 after 0 usecs
calling  topology_sysfs_init+0x0/0x30 @ 1
initcall topology_sysfs_init+0x0/0x30 returned 0 after 13 usecs
calling  cacheinfo_sysfs_init+0x0/0x2d @ 1
initcall cacheinfo_sysfs_init+0x0/0x2d returned 164 after 230 usecs
calling  devcoredump_init+0x0/0x19 @ 1
initcall devcoredump_init+0x0/0x19 returned 0 after 3 usecs
calling  loop_init+0x0/0x140 @ 1
loop: module loaded
initcall loop_init+0x0/0x140 returned 0 after 1068 usecs
calling  init_cryptoloop+0x0/0x28 @ 1
initcall init_cryptoloop+0x0/0x28 returned 0 after 0 usecs
calling  init+0x0/0x7a @ 1
initcall init+0x0/0x7a returned 0 after 11 usecs
calling  raid_init+0x0/0x12 @ 1
initcall raid_init+0x0/0x12 returned 0 after 2 usecs
calling  spi_transport_init+0x0/0x77 @ 1
initcall spi_transport_init+0x0/0x77 returned 0 after 4 usecs
calling  fc_transport_init+0x0/0x80 @ 1
initcall fc_transport_init+0x0/0x80 returned 0 after 6 usecs
calling  sas_transport_init+0x0/0xb6 @ 1
initcall sas_transport_init+0x0/0xb6 returned 0 after 9 usecs
calling  sas_class_init+0x0/0x34 @ 1
initcall sas_class_init+0x0/0x34 returned 0 after 1 usecs
calling  blogic_init+0x0/0x1034 @ 1
initcall blogic_init+0x0/0x1034 returned 0 after 16 usecs
calling  isci_init+0x0/0x68 @ 1
isci: Intel(R) C600 SAS Controller Driver - version 1.2.0
initcall isci_init+0x0/0x68 returned 0 after 10 usecs
calling  hpsa_init+0x0/0x4e @ 1
initcall hpsa_init+0x0/0x4e returned 0 after 8 usecs
calling  megasas_init+0x0/0x1d0 @ 1
megasas: 06.812.07.00-rc1
initcall megasas_init+0x0/0x1d0 returned 0 after 10 usecs
calling  _mpt3sas_init+0x0/0x1bb @ 1
mpt3sas version 14.101.00.00 loaded
initcall _mpt3sas_init+0x0/0x1bb returned 0 after 51 usecs
calling  init+0x0/0x13f @ 1
initcall init+0x0/0x13f returned 0 after 7 usecs
calling  pvscsi_init+0x0/0x35 @ 1
VMware PVSCSI driver - version 1.0.7.0-k
initcall pvscsi_init+0x0/0x35 returned 0 after 7 usecs
calling  storvsc_drv_init+0x0/0x84 @ 1
hv_vmbus: registering driver hv_storvsc
initcall storvsc_drv_init+0x0/0x84 returned -19 after 2 usecs
calling  init_sd+0x0/0x173 @ 1
initcall init_sd+0x0/0x173 returned 0 after 8 usecs
calling  init_sg+0x0/0xc1 @ 1
initcall init_sg+0x0/0xc1 returned 0 after 2 usecs
calling  nvme_core_init+0x0/0x79 @ 1
initcall nvme_core_init+0x0/0x79 returned 0 after 11 usecs
calling  nvme_init+0x0/0x5a @ 1
initcall nvme_init+0x0/0x5a returned 0 after 37 usecs
calling  ahci_pci_driver_init+0x0/0x1b @ 1
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x8 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: DUMMY
ata2: DUMMY
ata3: DUMMY
ata4: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a280 irq 42
initcall ahci_pci_driver_init+0x0/0x1b returned 0 after 10775 usecs
calling  ahci_driver_init+0x0/0x14 @ 1
initcall ahci_driver_init+0x0/0x14 returned 0 after 9 usecs
calling  piix_init+0x0/0x29 @ 1
initcall piix_init+0x0/0x29 returned 0 after 13 usecs
calling  sch_pci_driver_init+0x0/0x1b @ 1
initcall sch_pci_driver_init+0x0/0x1b returned 0 after 9 usecs
calling  mpiix_pci_driver_init+0x0/0x1b @ 1
initcall mpiix_pci_driver_init+0x0/0x1b returned 0 after 7 usecs
calling  ata_generic_pci_driver_init+0x0/0x1b @ 1
initcall ata_generic_pci_driver_init+0x0/0x1b returned 0 after 7 usecs
calling  drm_kms_helper_init+0x0/0x15 @ 1
initcall drm_kms_helper_init+0x0/0x15 returned 0 after 0 usecs
calling  drm_core_init+0x0/0xb9 @ 1
[drm] Initialized
initcall drm_core_init+0x0/0xb9 returned 0 after 7 usecs
calling  ttm_init+0x0/0x5d @ 1
initcall ttm_init+0x0/0x5d returned 0 after 8 usecs
calling  i915_init+0x0/0x55 @ 1
[drm] Memory usable by graphics device = 2048M
checking generic (e0000000 300000) vs hw (e0000000 10000000)
fb: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
acpi device:60: registered as cooling_device9
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2
[drm] Initialized i915 1.6.0 20161121 for 0000:00:02.0 on minor 0
initcall i915_init+0x0/0x55 returned 0 after 12422 usecs
calling  cirrus_init+0x0/0x3e @ 1
initcall cirrus_init+0x0/0x3e returned 0 after 10 usecs
calling  bochs_init+0x0/0x19 @ 1
initcall bochs_init+0x0/0x19 returned 0 after 6 usecs
calling  virtio_gpu_driver_init+0x0/0x12 @ 1
initcall virtio_gpu_driver_init+0x0/0x12 returned 0 after 3 usecs
calling  net_olddevs_init+0x0/0x62 @ 1
initcall net_olddevs_init+0x0/0x62 returned 0 after 2 usecs
calling  tun_init+0x0/0x94 @ 1
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
initcall tun_init+0x0/0x94 returned 0 after 34 usecs
calling  e100_init_module+0x0/0x59 @ 1
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
initcall e100_init_module+0x0/0x59 returned 0 after 18 usecs
calling  fusion_init+0x0/0xf4 @ 1
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
initcall fusion_init+0x0/0xf4 returned 0 after 3 usecs
calling  mptspi_init+0x0/0xec @ 1
Fusion MPT SPI Host driver 3.04.20
initcall mptspi_init+0x0/0xec returned 0 after 8 usecs
calling  mptsas_init+0x0/0x133 @ 1
Fusion MPT SAS Host driver 3.04.20
initcall mptsas_init+0x0/0x133 returned 0 after 8 usecs
calling  ehci_hcd_init+0x0/0xc1 @ 1
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
initcall ehci_hcd_init+0x0/0xc1 returned 0 after 2 usecs
calling  ehci_pci_init+0x0/0x67 @ 1
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c3b000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.10.9-329.native ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
initcall ehci_pci_init+0x0/0x67 returned 0 after 11014 usecs
calling  uhci_hcd_init+0x0/0x117 @ 1
uhci_hcd: USB Universal Host Controller Interface driver
initcall uhci_hcd_init+0x0/0x117 returned 0 after 15 usecs
calling  xhci_hcd_init+0x0/0x15 @ 1
initcall xhci_hcd_init+0x0/0x15 returned 0 after 0 usecs
calling  xhci_pci_init+0x0/0x44 @ 1
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.10.9-329.native xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 9 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.10.9-329.native xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
initcall xhci_pci_init+0x0/0x44 returned 0 after 4068 usecs
calling  usb_storage_driver_init+0x0/0x30 @ 1
usbcore: registered new interface driver usb-storage
initcall usb_storage_driver_init+0x0/0x30 returned 0 after 14 usecs
calling  ucsi_acpi_platform_driver_init+0x0/0x14 @ 1
initcall ucsi_acpi_platform_driver_init+0x0/0x14 returned 0 after 8 usecs
calling  evdev_init+0x0/0x12 @ 1
initcall evdev_init+0x0/0x12 returned 0 after 70 usecs
calling  cmos_init+0x0/0x69 @ 1
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
initcall cmos_init+0x0/0x69 returned 0 after 160 usecs
calling  dw_i2c_driver_init+0x0/0x1b @ 1
initcall dw_i2c_driver_init+0x0/0x1b returned 0 after 8 usecs
calling  acpi_power_meter_init+0x0/0x37 @ 1
initcall acpi_power_meter_init+0x0/0x37 returned 0 after 21 usecs
calling  coretemp_init+0x0/0xb9 @ 1
initcall coretemp_init+0x0/0xb9 returned 0 after 81 usecs
calling  powerclamp_init+0x0/0x236 @ 1
initcall powerclamp_init+0x0/0x236 returned 0 after 18 usecs
calling  pkg_temp_thermal_init+0x0/0x11d @ 1
initcall pkg_temp_thermal_init+0x0/0x11d returned 0 after 48 usecs
calling  raid0_init+0x0/0x12 @ 1
initcall raid0_init+0x0/0x12 returned 0 after 0 usecs
calling  raid_init+0x0/0x12 @ 1
initcall raid_init+0x0/0x12 returned 0 after 0 usecs
calling  raid_init+0x0/0x12 @ 1
initcall raid_init+0x0/0x12 returned 0 after 0 usecs
calling  dm_init+0x0/0x46 @ 1
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
initcall dm_init+0x0/0x46 returned 0 after 69 usecs
calling  cpufreq_gov_dbs_init+0x0/0x12 @ 1
initcall cpufreq_gov_dbs_init+0x0/0x12 returned 0 after 0 usecs
calling  intel_pstate_init+0x0/0x4e7 @ 1
intel_pstate: Intel P-state driver initializing
initcall intel_pstate_init+0x0/0x4e7 returned 0 after 104 usecs
calling  mmc_blk_init+0x0/0x79 @ 1
initcall mmc_blk_init+0x0/0x79 returned 0 after 4 usecs
calling  sdhci_drv_init+0x0/0x20 @ 1
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
initcall sdhci_drv_init+0x0/0x20 returned 0 after 0 usecs
calling  sdhci_driver_init+0x0/0x1b @ 1
initcall sdhci_driver_init+0x0/0x1b returned 0 after 8 usecs
calling  sdhci_acpi_driver_init+0x0/0x14 @ 1
initcall sdhci_acpi_driver_init+0x0/0x14 returned 0 after 6 usecs
calling  dmi_sysfs_init+0x0/0x9d @ 1
initcall dmi_sysfs_init+0x0/0x9d returned 0 after 278 usecs
calling  efivars_sysfs_init+0x0/0x210 @ 1
EFI Variables Facility v0.08 2004-May-17
initcall efivars_sysfs_init+0x0/0x210 returned 0 after 4803 usecs
calling  esrt_sysfs_init+0x0/0x2e0 @ 1
initcall esrt_sysfs_init+0x0/0x2e0 returned -38 after 0 usecs
calling  efivars_pstore_init+0x0/0x9f @ 1
pstore: using zlib compression
pstore: Registered efi as persistent store backend
initcall efivars_pstore_init+0x0/0x9f returned 0 after 2 usecs
calling  efibc_init+0x0/0x38 @ 1
initcall efibc_init+0x0/0x38 returned 0 after 0 usecs
calling  efi_capsule_loader_init+0x0/0x3f @ 1
initcall efi_capsule_loader_init+0x0/0x3f returned 0 after 38 usecs
calling  hid_init+0x0/0x5d @ 1
hidraw: raw HID events driver (C) Jiri Kosina
initcall hid_init+0x0/0x5d returned 0 after 20 usecs
calling  hid_generic_init+0x0/0x1b @ 1
initcall hid_generic_init+0x0/0x1b returned 0 after 4 usecs
calling  belkin_driver_init+0x0/0x1b @ 1
initcall belkin_driver_init+0x0/0x1b returned 0 after 3 usecs
calling  ch_driver_init+0x0/0x1b @ 1
initcall ch_driver_init+0x0/0x1b returned 0 after 3 usecs
calling  ch_driver_init+0x0/0x1b @ 1
initcall ch_driver_init+0x0/0x1b returned 0 after 3 usecs
calling  holtek_kbd_driver_init+0x0/0x1b @ 1
initcall holtek_kbd_driver_init+0x0/0x1b returned 0 after 3 usecs
calling  holtek_mouse_driver_init+0x0/0x1b @ 1
initcall holtek_mouse_driver_init+0x0/0x1b returned 0 after 3 usecs
calling  holtek_driver_init+0x0/0x1b @ 1
initcall holtek_driver_init+0x0/0x1b returned 0 after 3 usecs
calling  ks_driver_init+0x0/0x1b @ 1
initcall ks_driver_init+0x0/0x1b returned 0 after 3 usecs
calling  lenovo_driver_init+0x0/0x1b @ 1
initcall lenovo_driver_init+0x0/0x1b returned 0 after 3 usecs
calling  lg_driver_init+0x0/0x1b @ 1
initcall lg_driver_init+0x0/0x1b returned 0 after 3 usecs
calling  ms_driver_init+0x0/0x1b @ 1
initcall ms_driver_init+0x0/0x1b returned 0 after 3 usecs
calling  samsung_driver_init+0x0/0x1b @ 1
initcall samsung_driver_init+0x0/0x1b returned 0 after 3 usecs
calling  hid_init+0x0/0x4a @ 1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
initcall hid_init+0x0/0x4a returned 0 after 7 usecs
calling  i2c_hid_driver_init+0x0/0x14 @ 1
initcall i2c_hid_driver_init+0x0/0x14 returned 0 after 4 usecs
calling  ips_pci_driver_init+0x0/0x1b @ 1
initcall ips_pci_driver_init+0x0/0x1b returned 0 after 5 usecs
calling  powercap_init+0x0/0x285 @ 1
initcall powercap_init+0x0/0x285 returned 0 after 18 usecs
calling  rapl_init+0x0/0x201 @ 1
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
initcall rapl_init+0x0/0x201 returned 0 after 125 usecs
calling  sock_diag_init+0x0/0x35 @ 1
initcall sock_diag_init+0x0/0x35 returned 0 after 10 usecs
calling  llc_init+0x0/0x20 @ 1
initcall llc_init+0x0/0x20 returned 0 after 0 usecs
calling  snap_init+0x0/0x38 @ 1
initcall snap_init+0x0/0x38 returned 0 after 0 usecs
calling  blackhole_init+0x0/0x12 @ 1
initcall blackhole_init+0x0/0x12 returned 0 after 0 usecs
calling  cbq_module_init+0x0/0x12 @ 1
initcall cbq_module_init+0x0/0x12 returned 0 after 0 usecs
calling  multiq_module_init+0x0/0x12 @ 1
initcall multiq_module_init+0x0/0x12 returned 0 after 0 usecs
calling  codel_module_init+0x0/0x12 @ 1
initcall codel_module_init+0x0/0x12 returned 0 after 0 usecs
calling  fq_codel_module_init+0x0/0x12 @ 1
initcall fq_codel_module_init+0x0/0x12 returned 0 after 0 usecs
calling  fq_module_init+0x0/0x51 @ 1
initcall fq_module_init+0x0/0x51 returned 0 after 3 usecs
calling  init_cgroup_cls+0x0/0x12 @ 1
initcall init_cgroup_cls+0x0/0x12 returned 0 after 0 usecs
calling  nfnetlink_init+0x0/0x6e @ 1
Netfilter messages via NETLINK v0.30.
initcall nfnetlink_init+0x0/0x6e returned 0 after 2 usecs
calling  nfnl_acct_init+0x0/0x64 @ 1
nfnl_acct: registering with nfnetlink.
initcall nfnl_acct_init+0x0/0x64 returned 0 after 0 usecs
calling  nfnetlink_queue_init+0x0/0x98 @ 1
initcall nfnetlink_queue_init+0x0/0x98 returned 0 after 4 usecs
calling  nfnetlink_log_init+0x0/0x9a @ 1
initcall nfnetlink_log_init+0x0/0x9a returned 0 after 2 usecs
calling  xt_init+0x0/0x10e @ 1
initcall xt_init+0x0/0x10e returned 0 after 0 usecs
calling  tcpudp_mt_init+0x0/0x17 @ 1
initcall tcpudp_mt_init+0x0/0x17 returned 0 after 0 usecs
calling  mark_mt_init+0x0/0x3d @ 1
initcall mark_mt_init+0x0/0x3d returned 0 after 0 usecs
calling  gre_offload_init+0x0/0x49 @ 1
initcall gre_offload_init+0x0/0x49 returned 0 after 0 usecs
calling  sysctl_ipv4_init+0x0/0x4c @ 1
initcall sysctl_ipv4_init+0x0/0x4c returned 0 after 37 usecs
calling  bbr_register+0x0/0x12 @ 1
initcall bbr_register+0x0/0x12 returned 0 after 0 usecs
calling  xfrm_user_init+0x0/0x45 @ 1
Initializing XFRM netlink socket
initcall xfrm_user_init+0x0/0x45 returned 0 after 1 usecs
calling  inet6_init+0x0/0x335 @ 1
NET: Registered protocol family 10
Segment Routing with IPv6
initcall inet6_init+0x0/0x335 returned 0 after 247 usecs
calling  packet_init+0x0/0x42 @ 1
NET: Registered protocol family 17
initcall packet_init+0x0/0x42 returned 0 after 1 usecs
calling  packet_diag_init+0x0/0x12 @ 1
initcall packet_diag_init+0x0/0x12 returned 0 after 0 usecs
calling  br_init+0x0/0xd0 @ 1
initcall br_init+0x0/0xd0 returned 0 after 4 usecs
calling  br_netfilter_init+0x0/0xa9 @ 1
Bridge firewalling registered
initcall br_netfilter_init+0x0/0xa9 returned 0 after 4 usecs
calling  ebtables_init+0x0/0x49 @ 1
Ebtables v2.0 registered
initcall ebtables_init+0x0/0x49 returned 0 after 0 usecs
calling  ebtable_broute_init+0x0/0x23 @ 1
initcall ebtable_broute_init+0x0/0x23 returned 0 after 5 usecs
calling  ebtable_filter_init+0x0/0x3e @ 1
initcall ebtable_filter_init+0x0/0x3e returned 0 after 2 usecs
calling  ebtable_nat_init+0x0/0x3e @ 1
initcall ebtable_nat_init+0x0/0x3e returned 0 after 2 usecs
calling  ebt_802_3_init+0x0/0x12 @ 1
initcall ebt_802_3_init+0x0/0x12 returned 0 after 0 usecs
calling  ebt_among_init+0x0/0x12 @ 1
initcall ebt_among_init+0x0/0x12 returned 0 after 0 usecs
calling  ebt_arp_init+0x0/0x12 @ 1
initcall ebt_arp_init+0x0/0x12 returned 0 after 0 usecs
calling  ebt_ip_init+0x0/0x12 @ 1
initcall ebt_ip_init+0x0/0x12 returned 0 after 0 usecs
calling  ebt_ip6_init+0x0/0x12 @ 1
initcall ebt_ip6_init+0x0/0x12 returned 0 after 0 usecs
calling  ebt_limit_init+0x0/0x12 @ 1
initcall ebt_limit_init+0x0/0x12 returned 0 after 0 usecs
calling  ebt_mark_m_init+0x0/0x12 @ 1
initcall ebt_mark_m_init+0x0/0x12 returned 0 after 0 usecs
calling  ebt_pkttype_init+0x0/0x12 @ 1
initcall ebt_pkttype_init+0x0/0x12 returned 0 after 0 usecs
calling  ebt_stp_init+0x0/0x12 @ 1
initcall ebt_stp_init+0x0/0x12 returned 0 after 0 usecs
calling  ebt_vlan_init+0x0/0x2e @ 1
initcall ebt_vlan_init+0x0/0x2e returned 0 after 0 usecs
calling  ebt_arpreply_init+0x0/0x12 @ 1
initcall ebt_arpreply_init+0x0/0x12 returned 0 after 0 usecs
calling  ebt_mark_init+0x0/0x12 @ 1
initcall ebt_mark_init+0x0/0x12 returned 0 after 0 usecs
calling  ebt_dnat_init+0x0/0x12 @ 1
initcall ebt_dnat_init+0x0/0x12 returned 0 after 0 usecs
calling  ebt_redirect_init+0x0/0x12 @ 1
initcall ebt_redirect_init+0x0/0x12 returned 0 after 0 usecs
calling  ebt_snat_init+0x0/0x12 @ 1
initcall ebt_snat_init+0x0/0x12 returned 0 after 0 usecs
calling  ebt_log_init+0x0/0x12 @ 1
initcall ebt_log_init+0x0/0x12 returned 0 after 0 usecs
calling  ebt_nflog_init+0x0/0x12 @ 1
initcall ebt_nflog_init+0x0/0x12 returned 0 after 0 usecs
calling  mcheck_init_device+0x0/0x16a @ 1
initcall mcheck_init_device+0x0/0x16a returned 0 after 161 usecs
calling  tboot_late_init+0x0/0x282 @ 1
initcall tboot_late_init+0x0/0x282 returned 0 after 0 usecs
calling  intel_rdt_late_init+0x0/0x1ec @ 1
initcall intel_rdt_late_init+0x0/0x1ec returned -19 after 0 usecs
calling  mcheck_late_init+0x0/0x93 @ 1
initcall mcheck_late_init+0x0/0x93 returned 0 after 2 usecs
calling  severities_debugfs_init+0x0/0x3b @ 1
initcall severities_debugfs_init+0x0/0x3b returned 0 after 0 usecs
calling  threshold_init_device+0x0/0x56 @ 1
initcall threshold_init_device+0x0/0x56 returned 0 after 0 usecs
calling  microcode_init+0x0/0x1cb @ 1
microcode: sig=0x40651, pf=0x40, revision=0x16
microcode: Microcode Update Driver: v2.2.
initcall microcode_init+0x0/0x1cb returned 0 after 55 usecs
calling  hpet_insert_resource+0x0/0x24 @ 1
initcall hpet_insert_resource+0x0/0x24 returned 0 after 1 usecs
calling  update_mp_table+0x0/0x43f @ 1
initcall update_mp_table+0x0/0x43f returned 0 after 0 usecs
calling  lapic_insert_resource+0x0/0x40 @ 1
initcall lapic_insert_resource+0x0/0x40 returned 0 after 0 usecs
calling  print_ICs+0x0/0x1a5 @ 1
initcall print_ICs+0x0/0x1a5 returned 0 after 0 usecs
calling  pat_memtype_list_init+0x0/0x35 @ 1
initcall pat_memtype_list_init+0x0/0x35 returned 0 after 0 usecs
calling  create_tlb_single_page_flush_ceiling+0x0/0x29 @ 1
initcall create_tlb_single_page_flush_ceiling+0x0/0x29 returned 0 after 0 usecs
calling  aesni_init+0x0/0x1e0 @ 1
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
initcall aesni_init+0x0/0x1e0 returned 0 after 313 usecs
calling  init_oops_id+0x0/0x40 @ 1
initcall init_oops_id+0x0/0x40 returned 0 after 0 usecs
calling  sched_init_debug+0x0/0x24 @ 1
initcall sched_init_debug+0x0/0x24 returned 0 after 1 usecs
calling  pm_qos_power_init+0x0/0xac @ 1
initcall pm_qos_power_init+0x0/0xac returned 0 after 87 usecs
calling  printk_late_init+0x0/0xc2 @ 1
initcall printk_late_init+0x0/0xc2 returned 0 after 0 usecs
calling  tk_debug_sleep_time_init+0x0/0x3c @ 1
initcall tk_debug_sleep_time_init+0x0/0x3c returned 0 after 0 usecs
calling  taskstats_init+0x0/0x37 @ 1
registered taskstats version 1
initcall taskstats_init+0x0/0x37 returned 0 after 14 usecs
calling  clear_boot_tracer+0x0/0x2e @ 1
initcall clear_boot_tracer+0x0/0x2e returned 0 after 0 usecs
calling  register_htab_map+0x0/0x38 @ 1
initcall register_htab_map+0x0/0x38 returned 0 after 0 usecs
calling  register_cgroup_array_map+0x0/0x14 @ 1
initcall register_cgroup_array_map+0x0/0x14 returned 0 after 0 usecs
calling  register_perf_event_array_map+0x0/0x14 @ 1
initcall register_perf_event_array_map+0x0/0x14 returned 0 after 0 usecs
calling  register_prog_array_map+0x0/0x14 @ 1
initcall register_prog_array_map+0x0/0x14 returned 0 after 0 usecs
calling  register_array_map+0x0/0x20 @ 1
initcall register_array_map+0x0/0x20 returned 0 after 0 usecs
calling  register_stack_map+0x0/0x14 @ 1
initcall register_stack_map+0x0/0x14 returned 0 after 0 usecs
calling  load_system_certificate_list+0x0/0xf5 @ 1
Loading compiled-in X.509 certificates
clr: call_modprobe: crypto-pkcs1pad(rsa,sha512)   2 
clr: call_modprobe: crypto-pkcs1pad(rsa,sha512)-all   2 
Loaded X.509 cert 'Build time autogenerated kernel key: 25ce6a352b8f834d3cfbde5928de64c907e5dd66'
initcall load_system_certificate_list+0x0/0xf5 returned 0 after 964 usecs
calling  fault_around_debugfs+0x0/0x35 @ 1
initcall fault_around_debugfs+0x0/0x35 returned 0 after 1 usecs
calling  max_swapfiles_check+0x0/0x8 @ 1
initcall max_swapfiles_check+0x0/0x8 returned 0 after 0 usecs
calling  split_huge_pages_debugfs+0x0/0x35 @ 1
initcall split_huge_pages_debugfs+0x0/0x35 returned 0 after 0 usecs
calling  check_early_ioremap_leak+0x0/0x45 @ 1
initcall check_early_ioremap_leak+0x0/0x45 returned 0 after 0 usecs
calling  init_btrfs_fs+0x0/0x129 @ 1
Btrfs loaded, crc32c=crc32c-intel
initcall init_btrfs_fs+0x0/0x129 returned 0 after 225 usecs
calling  init_root_keyring+0x0/0xb @ 1
initcall init_root_keyring+0x0/0xb returned 0 after 6 usecs
calling  prandom_reseed+0x0/0x2f @ 1
initcall prandom_reseed+0x0/0x2f returned 0 after 2 usecs
calling  pci_resource_alignment_sysfs_init+0x0/0x19 @ 1
initcall pci_resource_alignment_sysfs_init+0x0/0x19 returned 0 after 1 usecs
calling  pci_sysfs_init+0x0/0x55 @ 1
initcall pci_sysfs_init+0x0/0x55 returned 0 after 96 usecs
calling  bert_init+0x0/0x1ed @ 1
initcall bert_init+0x0/0x1ed returned 0 after 0 usecs
calling  clk_debug_init+0x0/0x147 @ 1
initcall clk_debug_init+0x0/0x147 returned 0 after 4 usecs
calling  dmar_free_unused_resources+0x0/0xbb @ 1
initcall dmar_free_unused_resources+0x0/0xbb returned 0 after 0 usecs
calling  deferred_probe_initcall+0x0/0x20 @ 1
initcall deferred_probe_initcall+0x0/0x20 returned 0 after 8 usecs
calling  acpi_cpufreq_init+0x0/0x1f2 @ 1
initcall acpi_cpufreq_init+0x0/0x1f2 returned -17 after 0 usecs
calling  firmware_memmap_init+0x0/0x33 @ 1
initcall firmware_memmap_init+0x0/0x33 returned 0 after 46 usecs
calling  efi_shutdown_init+0x0/0x31 @ 1
initcall efi_shutdown_init+0x0/0x31 returned 0 after 0 usecs
calling  pci_mmcfg_late_insert_resources+0x0/0x53 @ 1
initcall pci_mmcfg_late_insert_resources+0x0/0x53 returned 0 after 1 usecs
calling  register_sk_filter_ops+0x0/0x74 @ 1
initcall register_sk_filter_ops+0x0/0x74 returned 0 after 0 usecs
calling  tcp_congestion_default+0x0/0x12 @ 1
initcall tcp_congestion_default+0x0/0x12 returned 0 after 0 usecs
calling  clk_disable_unused+0x0/0x160 @ 1
initcall clk_disable_unused+0x0/0x160 returned 0 after 0 usecs
[drm] Cannot find any crtc or sizes - going 1024x768
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 128x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4.00: ATA-9: INTEL SSDMCEAC120B3, LLLi, max UDMA/133
ata4.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access     ATA      INTEL SSDMCEAC12 LLLi PQ: 0 ANSI: 5
sd 3:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: Attached scsi generic sg0 type 0
 sda: sda1 sda2 sda3
sd 3:0:0:0: [sda] Attached SCSI disk
md: Skipping autodetection of RAID arrays. (raid=autodetect will force)
usb 1-1: new high-speed USB device number 2 using ehci-pci
random: fast init done
EXT4-fs (sda3): 50 orphan inodes deleted
EXT4-fs (sda3): recovery complete
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 8:3.
devtmpfs: mounted
Freeing unused kernel memory: 1124K
Write protecting the kernel read-only data: 18432k
Freeing unused kernel memory: 1624K
Freeing unused kernel memory: 1876K
systemd[1]: RTC configured in localtime, applying delta of -300 minutes to system time.
systemd[1]: systemd 231 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR -SMACK -SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL -XZ -LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
usb 1-1: New USB device found, idVendor=8087, idProduct=8000
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 8 ports detected
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
clr: call_modprobe: net-pf-16-proto-9   2 
systemd[1]: Reached target Remote File Systems.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Listening on Process Core Dump Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Listening on Network Service Netlink Socket.
systemd-journald[214]: Received request to flush runtime journal from PID 1
calling  tpm_init+0x0/0x1000 [tpm] @ 234
initcall tpm_init+0x0/0x1000 [tpm] returned 0 after 7 usecs
calling  init_tis+0x0/0x1000 [tpm_tis] @ 232
initcall init_tis+0x0/0x1000 [tpm_tis] returned 0 after 65 usecs
calling  dw_i2c_init_driver+0x0/0x1000 [i2c_designware_platform] @ 239
initcall dw_i2c_init_driver+0x0/0x1000 [i2c_designware_platform] returned 0 after 22 usecs
calling  pxa2xx_spi_init+0x0/0x1000 [spi_pxa2xx_platform] @ 242
initcall pxa2xx_spi_init+0x0/0x1000 [spi_pxa2xx_platform] returned 0 after 19 usecs
calling  i8042_init+0x0/0x6b4 [i8042] @ 234
i8042: PNP detection disabled
Adding 524284k swap on /dev/sda2.  Priority:-1 extents:1 across:524284k SS
i8042: No controller found
initcall i8042_init+0x0/0x6b4 [i8042] returned -19 after 1043052 usecs
tsc: Refined TSC clocksource calibration: 1895.613 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x36a5f6ffac1, max_idle_ns: 881590505081 ns
clocksource: Switched to clocksource tsc
calling  elan_driver_init+0x0/0x1000 [elan_i2c] @ 261
initcall elan_driver_init+0x0/0x1000 [elan_i2c] returned 0 after 24 usecs
calling  init_soundcore+0x0/0x1000 [soundcore] @ 249
initcall init_soundcore+0x0/0x1000 [soundcore] returned 0 after 4 usecs
calling  e1000_init_module+0x0/0x1000 [e1000e] @ 252
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic mode
calling  lpc_ich_driver_init+0x0/0x1000 [lpc_ich] @ 243
calling  alsa_sound_init+0x0/0x82 [snd] @ 249
initcall alsa_sound_init+0x0/0x82 [snd] returned 0 after 5 usecs
calling  alsa_pcm_init+0x0/0x1000 [snd_pcm] @ 249
initcall alsa_pcm_init+0x0/0x1000 [snd_pcm] returned 0 after 2 usecs
calling  hda_bus_init+0x0/0x12 [snd_hda_core] @ 249
initcall hda_bus_init+0x0/0x12 [snd_hda_core] returned 0 after 7 usecs
calling  alsa_hwdep_init+0x0/0x1000 [snd_hwdep] @ 249
initcall alsa_hwdep_init+0x0/0x1000 [snd_hwdep] returned 0 after 1 usecs
calling  azx_driver_init+0x0/0xfd4 [snd_hda_intel] @ 249
calling  i8042_init+0x0/0x6b4 [i8042] @ 234
i8042: PNP detection disabled
e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) c0:3f:d5:61:18:e5
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
initcall e1000_init_module+0x0/0x1000 [e1000e] returned 0 after 295962 usecs
initcall lpc_ich_driver_init+0x0/0x1000 [lpc_ich] returned 0 after 293350 usecs
snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
initcall azx_driver_init+0x0/0xfd4 [snd_hda_intel] returned 0 after 279501 usecs
snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops)
clr: call_modprobe: i915   2 
clr: call_modprobe: hdaudio:v10EC0283r00100003a01
                  2 
clr: call_modprobe: hdaudio:v80862807r00100000a01
                  2 
i8042: No controller found
initcall i8042_init+0x0/0x6b4 [i8042] returned -19 after 1043814 usecs
calling  hdmi_driver_init+0x0/0x1000 [snd_hda_codec_hdmi] @ 280
calling  generic_driver_init+0x0/0x1000 [snd_hda_codec_generic] @ 279
initcall generic_driver_init+0x0/0x1000 [snd_hda_codec_generic] returned 0 after 13 usecs
initcall hdmi_driver_init+0x0/0x1000 [snd_hda_codec_hdmi] returned 0 after 1194 usecs
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input3
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input4
input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input5
e1000e 0000:00:19.0 eno1: renamed from eth0
calling  realtek_driver_init+0x0/0x1000 [snd_hda_codec_realtek] @ 261
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC283: line_outs=1 (0x21/0x0/0x0/0x0/0x0) type:hp
snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0:    inputs:
snd_hda_codec_realtek hdaudioC1D0:      Mic=0x19
initcall realtek_driver_init+0x0/0x1000 [snd_hda_codec_realtek] returned 0 after 39040 usecs
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input6
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7
random: crng init done
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
calling  fuse_init+0x0/0x19e [fuse] @ 480
fuse init (API version 7.26)
initcall fuse_init+0x0/0x19e [fuse] returned 0 after 103 usecs
calling  nf_conntrack_standalone_init+0x0/0x1000 [nf_conntrack] @ 502
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
initcall nf_conntrack_standalone_init+0x0/0x1000 [nf_conntrack] returned 0 after 222 usecs
calling  nf_nat_init+0x0/0x1000 [nf_nat] @ 502
initcall nf_nat_init+0x0/0x1000 [nf_nat] returned 0 after 5 usecs
calling  conntrack_mt_init+0x0/0x1000 [xt_conntrack] @ 507
initcall conntrack_mt_init+0x0/0x1000 [xt_conntrack] returned 0 after 0 usecs
calling  ip_tables_init+0x0/0x1000 [ip_tables] @ 510
ip_tables: (C) 2000-2006 Netfilter Core Team
initcall ip_tables_init+0x0/0x1000 [ip_tables] returned 0 after 5 usecs
clr: call_modprobe: iptable_filter   2 
calling  iptable_filter_init+0x0/0x1000 [iptable_filter] @ 511
initcall iptable_filter_init+0x0/0x1000 [iptable_filter] returned 0 after 11 usecs
clr: call_modprobe: ipt_addrtype   2 
calling  addrtype_mt_init+0x0/0x1000 [xt_addrtype] @ 516
initcall addrtype_mt_init+0x0/0x1000 [xt_addrtype] returned 0 after 0 usecs
clr: call_modprobe: iptable_nat   2 
calling  nf_nat_l3proto_ipv4_init+0x0/0x1000 [nf_nat_ipv4] @ 518
clr: call_modprobe: nf_conntrack-2   2 
calling  nf_defrag_init+0x0/0x1000 [nf_defrag_ipv4] @ 519
initcall nf_defrag_init+0x0/0x1000 [nf_defrag_ipv4] returned 0 after 0 usecs
calling  nf_conntrack_l3proto_ipv4_init+0x0/0x1000 [nf_conntrack_ipv4] @ 519
initcall nf_conntrack_l3proto_ipv4_init+0x0/0x1000 [nf_conntrack_ipv4] returned 0 after 27 usecs
initcall nf_nat_l3proto_ipv4_init+0x0/0x1000 [nf_nat_ipv4] returned 0 after 3123 usecs
calling  iptable_nat_init+0x0/0x1000 [iptable_nat] @ 518
initcall iptable_nat_init+0x0/0x1000 [iptable_nat] returned 0 after 17 usecs
clr: call_modprobe: ipt_MASQUERADE   2 
calling  masquerade_tg_init+0x0/0x1000 [ipt_MASQUERADE] @ 549
initcall masquerade_tg_init+0x0/0x1000 [ipt_MASQUERADE] returned 0 after 2 usecs
IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
usb 2-1: new low-speed USB device number 2 using xhci_hcd
usb 2-1: New USB device found, idVendor=03f0, idProduct=034a
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: HP Elite USB Keyboard
usb 2-1: Manufacturer: Chicony
input: Chicony HP Elite USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/0003:03F0:034A.0001/input/input8
hid-generic 0003:03F0:034A.0001: input,hidraw0: USB HID v1.10 Keyboard [Chicony HP Elite USB Keyboard] on usb-0000:00:14.0-1/input0
input: Chicony HP Elite USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.1/0003:03F0:034A.0002/input/input9
hid-generic 0003:03F0:034A.0002: input,hidraw1: USB HID v1.10 Device [Chicony HP Elite USB Keyboard] on usb-0000:00:14.0-1/input1
usb 2-1: USB disconnect, device number 2

Return To Intel Core i5-4250U - Intel Haswell-ULT IGP - Intel System Information